You are here: Home > Chainsaw > Stihl > MS191
We found 41 results matching your criteria.
Sort By:
Page of 2
100 Pack - Fuel filter fits Stihl replaces 0000-350-3500 Oregon 16" bar and chain combo, 160SDEA074/ 91PX055 SDG Double Guard Oregon 14" bar and chain combo, 140SDEA074/ 91PX050 SDG Double Guard
List Price: $129.99
Our Price: $99.99
Part #: H20002-DNS
Our Price: $43.99
Sale Price: $42.99
Part #: 557502

(2)
Our Price: $44.24
Sale Price: $41.99
Part #: 557501
Stihl concrete cut off saw fuel filter
Quality aftermarket fuel filter.
For Stihl chainsaws and cut off saws.
Replaces OEM part: 0000 350 3500
This will fit a fuel line with an inner diameter of 4.5mm to 5.3mm
Bar and chain combo by Oregon.
3/8" pitch, .050" guage.
Bar length: 16"
Chain type: 91PX
Drive links: 55
Bar type: Double Guard
Bar part #: 160 SDE A074

Fits: Stihl
Bar and chain combo by Oregon.
3/8" pitch, .050" guage.
Bar length: 14"
Chain type: 91PX
Drive links: 50
Bar type: Double Guard
Bar part #: 140 MLE A074

Fits: Stihl
Oregon 14" bar and chain combo, 144MLEA074/90SG050W SDG Double Guard Stihl 018*, 019T, MS170, MS180, MS190T, MS191T crankshaft and bearings kit for 10mm piston pin* Oregon 12" bar and chain combo, 124MLEA074/90SG044W SDG Double Guard
Our Price: $44.24
Sale Price: $41.99
Part #: 540390
List Price: $89.99
Our Price: $39.99
Part #: H35017-DNS
Our Price: $39.30
Sale Price: $36.99
Part #: 540389
Stihl 017, 018, MS170, MS180 replacement crankshaft
Bar and chain combo by Oregon.
3/8" pitch, .043" guage.
Bar length: 14"
Chain type: 90PX(SG)
Drive links: 50
Bar type: Double Guard
Bar part #: 144 MLE A074

Fits: Stihl
Quality aftermarket crankshaft kit.
Includes pin bearing, oil seals, bearings and engine pan.
Fits: Stihl 018*, 019T, MS170, MS180, MS190T, MS191T chainsaw.
*Only fits newer models with a 10mm piston pin. Eariler models of 018 use an 8mm pin. Please verify before ordering.
Replaces OEM part: 1132-030-0401, 1132-030-1402
Bar and chain combo by Oregon.
3/8" pitch, .043" guage.
Bar length: 12"
Chain type: 90PX(SG)
Drive links: 44
Bar type: Double Guard
Bar part #: 124 MLE A074

Fits: Stihl
Stihl MS191 piston kit 46mm Stihl 017, 018, 019T, MS170, MS180, MS190T, MS191T crankshaft for 10mm piston pin* Cross Performance Bar and Chain Combo 16", 3/8" lp pitch, .050" guage
List Price: $44.99
Our Price: $29.99
Part #: H31191

(1)
List Price: $74.99
Our Price: $49.99
Sale Price: $29.99
Part #: H35017
List Price: $32.49
Our Price: $23.99
Part #: A270-0

(1)
Stihl MS191 piston assembly 46mm Stihl 017, 018, MS170, MS180 replacement crankshaft
Quality aftermarket piston assembly. 46mm.
Fits: Stihl MS191 chainsaw
Includes: piston, rings, wrist pin, cir clips
Replaces OEM part: 1132 030 2001
Quality aftermarket crankshaft
Fits: Stihl 017, 018, 019T, MS170, MS180, MS190T, MS191T chainsaw.
*Only fits newer models with a 10mm piston pin. Eariler models of 017 and 018 use an 8mm pin. Please verify before ordering.
Replaces OEM part: 1132-030-0401, 1132-030-1402
Bar and Chain Combo by Cross Performance
Length: 16"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8 lp
Drive links: 55
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Cross Performance Bar and Chain Combo 14", 3/8" lp pitch, .050" guage 16" Raisman Sprocket Nose guide bar for Stihl, Oleo-Mac, .325" pitch, .063" Gauge 18" Raisman Sprocket Nose guide bar for Stihl, Oleo-Mac, .325" pitch, .063" Gauge
List Price: $29.49
Our Price: $21.99
Part #: A268-0

(1)
List Price: $23.99
Our Price: $17.99
Part #: 13-16-5511J3
List Price: $23.99
Our Price: $17.99
Part #: 13-18-525J3

(1)
Bar and Chain Combo by Cross Performance
Length: 14"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8 lp
Drive links: 50
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Raisman brand high quality chainsaw guide bar.
Length: 16"
Gauge: .063"
Bar type: Sprocket Nose
Nose size: .325"
Teeth count: 7
Drive links: 62
Bar mount: A074
Fits: Stihl: 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Raisman brand high quality chainsaw guide bar.
Length: 18"
Gauge: .063"
Bar type: Sprocket Nose
Nose size: .325"
Drive links: 68
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Oleo-Mac 240, 241, 244, 935, OLE 140F, OLE 300
Cross Performance Sprocket Nose Guide Bar 16", 3/8" lp pitch, .050" guage Caber piston rings 46mm fits Stihl MS191T, MS280, FS420, FS550 Cross Performance Sprocket Nose Guide Bar 14", 3/8" lp pitch, .050" guage
List Price: $19.49
Our Price: $14.49
Part #: 16D0-CL-SW
List Price: $22.49
Our Price: $13.99
Part #: CR4612
List Price: $17.49
Our Price: $12.99
Part #: 14D0-CL-SW
Caber piston rings set 46mm x 1.2mm
Sprocket Nose Guide Bar by Cross Performance
Length: 16"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8 lp
Drive links: 55
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Caber brand F-cast piston rings set. 46mm x 1.2mm.
Highest quality made in Italy. Exceeds OEM specifications.
Fits: 034 (not Super), Stihl MS191T, MS280, FS420, FS550
Replaces OEM part: 1121 034 3003, 4116 034 3005
Sprocket Nose Guide Bar by Cross Performance
Length: 14"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8 lp
Drive links: 50
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
16" Raisman Low Kickback Sprocket Nose guide bar for Stihl, Oleo-Mac, 3/8" pitch, .050" Gauge Bumper Spike Pro Bigger Type For Stihl 018, 020T, MS200T, 025, MS192T Caber piston rings 46mm fits Stihl 028, 029, MS290, 034, Husqvarna 55, 257, 357
List Price: $18.99
Our Price: $12.99
Part #: 13-16-511A1

(2)
List Price: $14.99
Our Price: $9.99
Part #: H59250

(2)
List Price: $13.49
Our Price: $9.99
Part #: CR4615

(9)
Caber piston rings set 46mm x 1.5mm
Raisman brand high quality chainsaw guide bar.
Length: 16"
Gauge: .050"
Bar type: Low Kickback Sprocket Nose
Nose size: 3/8"
Teeth count: 7 or 9
Drive links: 55
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Oleo-Mac 240, 241, 244, 935, OLE 140F, OLE 300
Quality aftermarket oversize felling dog kit
Fits: Stihl 017, 018, MS170, MS180, 020T, MS200T, 021, 023, 025, MS210, MS230, MS250, MS191T, MS192T
Includes 1 felling dog, 2 screws, 2 bar nuts.
Caber brand F-cast piston rings set
Highest quality made in Italy. Exceeds OEM specifications.
Fits: Stihl MS191, 028, 029, MS290, 034, BR400, SR400, Husqvarna 55, 257, 357 (Earlier 029's have a 45mm piston, earlier 028's have a 44mm piston. Please verify before ordering.)
Replaces OEM part: 1118 034 3001, 503 28 90-14 46mm x 1.5mm *
See Technical Specs for more information
Star Tron 8 oz. Enzyme Fuel Treatment Stihl starter spring replaces 1129-190-0601 Lucas High Performance 2-cycle semi-synthetic oil 1 pint (16 oz)
List Price: $12.74
Our Price: $8.49
Part #: H51004

(2)
List Price: $11.99
Our Price: $7.99
Part #: H62025

(3)
List Price: $11.24
Our Price: $7.49
Part #: H51012

(1)
Star Tron 8 oz. Enzyme Fuel Treatment Lucas 2-cycle semi-synthetic oil 6.4 oz
Star Tron Enzyme Fuel Treatment is a revolutionary new fuel additive using enzyme technology to enhance the performance of boats, automobiles, trucks, RVs, tractors, farm equipment, generators, lawn mowers, lawn equipment, oil burning furnaces and all other small engines.

Stabilizes Gas
Gas fuels break down rapidly which results in lost power and poor performance. Star Tron stabilizes the fuel chemistry for up to two years in gas

Eliminates, Prevents Ethanol Fuel Problems
Ethanol, E10 fuels increase the amounts of water and sludge in your fuel tank. Star Tron breaks down this excess water and sludge to sub-micron size allowing it to be safely burned away during normal engine operation. Therefore Star Tron prevents phase separation and fuel gelling, eliminating ethanol fuel problems.

8 oz. Small Engine Star Tron formula treats 48 gallons of fuel

This item is considered Hazardous Material and can only be shipped ground carrier.
Quality aftermarket starter recoil spring
Fits: Stihl 036, MS210, MS171, MS211, 021, 023, 025, 018, 034, MS170, MS181, 044, MS270, MS280, MS200 T, MS200, MS190 T, MS340, 017, MS191 T, MS290, MS310, MS390, MS360, MS440, 020 T, 020, MS230, MS180, MS250, 029, 039, 046, 019 T, MS460
Replaces OEM part: 1129 190 0601
Lucas High Performance Semi-Sythetic 2 CYCLE Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines.
Designed for any oil injection system or pre mix up to 50:1. Use in Snowmobiles, Weed Eaters, Leaf Blowers, Chain Saws, and more.

Lucas 2-Cycle Oil is an advanced technology 'smokeless' 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

16 oz size treats 6 gallons of gas at 50:1

Order 12 for a case and receive 25% off.
Zama carburetor rebuild kit RB-69 fits Stihl MS200T, MS192T, MS191T,... Stihl chain adjuster replaces 1123-007-1000 Stihl starter recoil pulley replaces 1123-195-0400
List Price: $9.56
Our Price: $6.56
Part #: RB-069
List Price: $14.99
Our Price: $9.99
Sale Price: $5.99
Part #: H55025

(4)
List Price: $7.49
Our Price: $4.99
Part #: H63025

(3)
Stihl 021 MS210 023 MS230 025 MS250 chain adjuster Stihl 021 MS210 023 MS230 025 MS250 starter recoil pulley
Quality aftermarket carburetor repair kit
Fits: Stihl MS200T, MS192T, MS191T
With Zama carburetor
Replaces OEM part(s): RB-069
Quality aftermarket chain adjuster
Fits: Stihl chainsaw models: 017, 018, 019T, 021, 023, 025, MS170, MS171, MS180, MS181, MS190T, MS191T, MS210, MS211, MS230, MS250
Replaces OEM part: 1123 007 1000
Quality aftermarket starter recoil pulley
Fits: Stihl: BG45, BG46, BG55, BG65, BG85, BR45, BT45, HS45, HS46, HS56, HS81, HS86, SH55, SH85, SH55, SH85, 017, 018, 019T, 020T, 020, 021, 023, 025, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192, MS200T, MS201T, MS210, MS211, MS230, MS250
Replaces OEM part: 1123 195 0400
Zama carburetor rebuild kit RB-84 fits Stihl MS191T, MS192T, MS200T, FS45, FS46, FS55, FS75, FS80,... Lucas 2-cycle semi-synthetic oil 6.4 oz Piston Ring 2pcs, 46mmx1.5mm
List Price: $7.92
Our Price: $4.92
Part #: RB-084
List Price: $6.74
Our Price: $4.49
Part #: H51011
List Price: $5.49
Our Price: $3.99
Part #: H4615
Lucas 2-cycle semi-synthetic oil 6.4 oz
Quality aftermarket carburetor repair kit
Fits: Stihl MS191T, MS192T, MS200T, FS45, FS46, FS55, FS75, FS80
With Zama carburetor
Replaces OEM part(s): RB-084
Lucas 2-Cycle Oil is an advanced technology smokeless 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

6.4 oz size treats 2.5 gallons of gas at 50:1

Order 24 for a case and receive 25% off.
Quality aftermarket Piston Ring - 2pcs, 46mmx1.5mm
For: Stihl MS291, MS311, MS341, MS361, MS362
Replaces OEM part(s) #: 1118 034 3001, 503 28 90-14
Piston Ring 2pcs, 46mmx1.2mm Stihl oil seals set replaces 9639-003-1585 AMSOIL SABER Professional Synthetic 2-Stroke Oil 3.5 oz
List Price: $5.49
Our Price: $3.99
Part #: H4612
List Price: $5.39
Our Price: $3.99
Part #: H29025

(6)
List Price: $5.99
Our Price: $3.99
Part #: H51020
Stihl 017, 018, 019, 021, 023, 025, MS170, MS180, MS210, MS230, MS250 replacement oil seals AMSOIL SABER Professional Synthetic 2-Stroke Oil
Quality aftermarket Piston Ring - 2pcs, 46mmx1.2mm
For: Stihl MS191, 028, 029, MS290, 034, BR400, SR400, Husqvarna 55...
Replaces OEM part(s) #: 1121 034 3003, 4116 034 3005
Quality aftermarket oil seals (2 pcs).
Fits: Stihl: 017, 018, 019T, 021, 023, 025, MS170, MS171, MS180, MS181, MS190, MS191T, MS210, MS211, MS230, MS250, MS270, MS280, MS311, MS391
Replaces OEM part: 9639 003 1585
One Oil Covers All Mix Ratios.
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power equipment such as chainsaws and lawn/utility equipment.
3.5 oz size treats 1.3 gallons of gas at 50:1
T-wrench Flathead x 19mm x 13mm (3/4" x 1/2") fits Stihl, Husqvarna, Partner, Makita Lucas 2-cycle semi-synthetic oil 2.6 oz Fuel filter fits Stihl replaces 0000-350-3500
List Price: $8.24
Our Price: $5.49
Sale Price: $2.99
Part #: H70402

(26)
List Price: $4.49
Our Price: $2.99
Part #: H51010

(1)
List Price: $4.49
Our Price: $2.99
Part #: H20002

(36)
T-wrench 19mm x 13mm (3/4" x 1/2") fits Stihl, Husqvarna, Partner, Makita Lucas 2-cycle semi-synthetic oil 2.6 oz Stihl concrete cut off saw fuel filter
Quality aftermarket T-wrench Flathead x 19mm x 13mm (3/4" x 1/2")
Fits: most chainsaws
Lucas 2-Cycle Oil is an advanced technology smokeless 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

2.6 oz size treats 1 gallon of gas at 50:1

Order 24 for a case and receive 25% off.
Quality aftermarket fuel filter.
For Stihl chainsaws and cut off saws.
Replaces OEM part: 0000 350 3500
This will fit a fuel line with an inner diameter of 4.5mm to 5.3mm
*Buy 10 or more and receive a 20% discount!
NGK spark plug fits many chainsaws and cut off saws Bosch spark plug fits many chainsaws and cut off saws Torch spark plug fits Chainsaws, Cut Off Saws
List Price: $4.39
Our Price: $2.79
Part #: BPMR7A

(20)
List Price: $4.19
Our Price: $2.79
Part #: WSR6F

(49)
List Price: $2.24
Our Price: $1.69
Part #: L7RTC

(16)
NGK spark plug BPMR7A Bosch spark plug fits many chainsaws and cut off saws Spark plug fits Stihl TS400 TS410 TS420 TS460 TS510 TS760
NGK brand spark plug BPMR7A
Fits: many models of chainsaw and cut off saws.
Replaces: BOSCH WSR6F, CHAMPION CJ7Y
*Buy 5 or more and receive a 20% discount!
Bosch brand spark plug WSR6F
Fits: many models of chainsaw and cut off saws.
Replaces: NGK BPM7A, CHAMPION CJ7Y
*Buy 5 or more and receive a 20% discount!
Torch brand spark plug
Fits Stihl, Husqvarna, Partner, Wacker, Makita cut off saws, chainsaws, etc.
Replaces: NGK BPM7A, Champion CJ7Y, Bosch WSR6F
*Buy 5 or more and receive a 20% discount!