You are here: Home > Chainsaw > Homelite
We found 30 results matching your criteria.

Homelite Chainsaw Parts

While there's nothing like a reliable Homelite chainsaw to take down trees, every arborist knows that every saw needs regular service and maintenance to save time and money. For example, the recoil starter system will especially cause you problems without regular maintenance. That's why we supply a wide selection of Homelite chainsaw parts including Homelite 330 chainsaw parts and Homelite XL chainsaw parts.

When sawdust gets into places where it causes problems or when you start losing engine power from excessive use, come browse through our collection of pistons, cylinders, engine compression testers, air filters, carburetor rebuild kits, replacement power toggle switches, spark plugs with wires and caps, flathead T-wrenches and many more Homelite chainsaw parts.

Sort By:
Page of 1
Chainsaw Mill For 36" Or Less Chainsaw 24" Sugihara Light weight guide bar for Husqvarna small mount, 0.375 pitch, .050" guage 20" Sugihara Light weight guide bar for Husqvarna small mount, 0.375 pitch, .050" guage
List Price: $168.49
Our Price: $124.99
Part #: HF80002
List Price: $132.40
Our Price: $120.36
Part #: VH2U-0Q62HV
List Price: $132.40
Our Price: $120.36
Part #: VH2U-0Q50HV
Quality aftermarket Chainsaw Mill
For 36" Or Less Chainsaw
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 24"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 84
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 20"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 72
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Husqvarna 455, 460* cylinder kit 47mm 18" Sugihara Light weight guide bar for Husqvarna small mount, 3/8 pitch, .050" guage 20" Sugihara Light weight guide bar for Husqvarna small mount, .325 pitch, .050" guage
List Price: $164.99
Our Price: $109.99
Part #: H30455

(3)
List Price: $106.22
Our Price: $96.56
Part #: VH2U-0Q45HV
List Price: $106.22
Our Price: $96.56
Part #: VH2U-0J50HV
Husqvarna 455 cylinder and piston assembly
Quality aftermarket cylinder kit. 47mm bore.
Fits: Husqvarna 455 chainsaw *Also fits 460 but is 2mm smaller than original.
Includes: cylinder, piston, rings, wrist pin, cir clips.
Replaces OEM part: 537 32 04-02
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 18"
Guage: .050"
Bar type: Light weight
Nose size: 3/8
Teeth count:
Drive links: 68
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 20"
Guage: .050"
Bar type: Light weight
Nose size: .325
Teeth count:
Drive links: 80
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
18" Sugihara Light weight guide bar for Husqvarna small mount, .325 pitch, .050" guage 16" Sugihara Light weight guide bar for Husqvarna small mount, 3/8 pitch, .050" guage 16" Sugihara Light weight guide bar for Husqvarna small mount, .325 pitch, .050" guage
List Price: $106.22
Our Price: $96.56
Part #: VH2U-0J45HV
List Price: $85.73
Our Price: $77.94
Part #: VH2U-0Q40HV
List Price: $85.73
Our Price: $77.94
Part #: VH2U-0J40HV
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 18"
Guage: .050"
Bar type: Light weight
Nose size: .325
Teeth count:
Drive links: 72
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 16"
Guage: .050"
Bar type: Light weight
Nose size: 3/8
Teeth count:
Drive links: 60
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 16"
Guage: .050"
Bar type: Light weight
Nose size: .325
Teeth count:
Drive links: 66
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Gasoline engine compression tester Top Saw Pocket multi-wrench with case 20" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .058" Gauge
List Price: $59.99
Our Price: $39.99
Sale Price: $29.99
Part #: H70900

(5)
List Price: $29.99
Our Price: $19.99
Part #: T705586

(1)
List Price: $24.99
Our Price: $18.99
Part #: 13-20-426A2

(1)
Chainsaw compression tester Top Saw Pocket multi-wrench with case
Gasoline engine compression tester
Fitted with 65mm gauge having two scales (psi and kPa), reading from 0-300psi and 0-2100kPa.
Includes quick coupling 150mm rigid stem with cone-type adapter and 320mm flexible adapter with 14mm and 18mm screw in adapters.
Use this tool to check your chainsaws, cut off saws, lawnmowers, and other small engines.
Top Saw Pocket Wrench Universal multi-tool with carrying case
Fits: Stihl, Husqvarna, Makita, Wacker, Jonsered, Partner, Poulan, Echo, and more chainsaws and cut off saws
Raisman brand high quality chainsaw guide bar.
Length: 20"
Gauge: .058"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 72
Bar mount: K095
Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
20" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .050" Gauge 16" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .050" Gauge Air filter Homelite SXL, XL-12, XL-15, XL-400 and XL-500
List Price: $23.99
Our Price: $17.99
Part #: 13-20-426A1
List Price: $21.99
Our Price: $15.99
Part #: 13-16-426A1
List Price: $15.74
Our Price: $10.49
Part #: T605105

(1)
Air filter Homelite SXL, XL-12, XL-15, XL-400 and XL-500
Raisman brand high quality chainsaw guide bar.
Length: 20"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 72
Bar mount: K095
Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Raisman brand high quality chainsaw guide bar.
Length: 16"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count:
Drive links: 60
Bar mount: K095
Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Quality aftermarket air filter
Fits: Homelite SXL, XL-12, XL-15, XL-400 and XL-500
Replaces OEM part: UP 06807, UP 00158, D 63589 C, D 63589 B
Walbro K10-HDC carburetor rebuild kit Star Tron 8 oz. Enzyme Fuel Treatment AMSOIL Semi-Synthetic Bar and Chain Oil 1 qt (32 oz)
List Price: $14.99
Our Price: $9.99
Part #: K10-HDC
List Price: $12.74
Our Price: $8.49
Part #: H51004

(2)
List Price: $11.99
Our Price: $7.99
Part #: H51015
Walbro K10-HDC carburetor rebuild kit Star Tron 8 oz. Enzyme Fuel Treatment AMSOIL Semi-Synthetic Bar and Chain Oil
Quality aftermarket carburetor repair kit.
Fits: Stihl 015 Homelite XL, Super 2, 2000
Replaces OEM part: WALBRO K10-HDC
Star Tron Enzyme Fuel Treatment is a revolutionary new fuel additive using enzyme technology to enhance the performance of boats, automobiles, trucks, RVs, tractors, farm equipment, generators, lawn mowers, lawn equipment, oil burning furnaces and all other small engines.

Stabilizes Gas
Gas fuels break down rapidly which results in lost power and poor performance. Star Tron stabilizes the fuel chemistry for up to two years in gas

Eliminates, Prevents Ethanol Fuel Problems
Ethanol, E10 fuels increase the amounts of water and sludge in your fuel tank. Star Tron breaks down this excess water and sludge to sub-micron size allowing it to be safely burned away during normal engine operation. Therefore Star Tron prevents phase separation and fuel gelling, eliminating ethanol fuel problems.

8 oz. Small Engine Star Tron formula treats 48 gallons of fuel

This item is considered Hazardous Material and can only be shipped ground carrier.
Tacky formula clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection. Anti-wear additives extend the life of bar and chain applications. Ideal for chainsaws.
  • 1 quart (32 oz) size.
  • Stop toggle switch fits Husqvarna & Homelite chainsaws Walbro carburetor rebuild kit K20-HDA fits Husqvarna 257, 250R,... Lucas High Performance 2-cycle semi-synthetic oil 1 pint (16 oz)
    List Price: $11.99
    Our Price: $7.99
    Part #: A-B1IG73

    (1)
    List Price: $10.76
    Our Price: $7.76
    Part #: K20-HDA

    (2)
    List Price: $11.24
    Our Price: $7.49
    Part #: H51012

    (1)
    Walbro K20-HDA carburetor rebuild kit Lucas 2-cycle semi-synthetic oil 6.4 oz
    Quality aftermarket stop switch
    Fits: many models of Husqvarna, Homelite chainsaws
    Replaces OEM part: 501 55 20-01, 501 55 22-01
    Quality aftermarket carburetor repair kit
    Fits: Husqvarna 257, 250R
    With Walbro carburetor
    Replaces OEM part(s): K20-HDA
    Lucas High Performance Semi-Sythetic 2 CYCLE Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines.
    Designed for any oil injection system or pre mix up to 50:1. Use in Snowmobiles, Weed Eaters, Leaf Blowers, Chain Saws, and more.

    Lucas 2-Cycle Oil is an advanced technology 'smokeless' 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
    The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
    User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

    16 oz size treats 6 gallons of gas at 50:1

    Order 12 for a case and receive 25% off.
    Walbro carburetor rebuild kit K20-WAT fits Stihl 017, 018, 021, 023, 025, MS210, MS230, MS250,... Lucas 2-cycle semi-synthetic oil 6.4 oz T-wrench Flathead x 19mm x 13mm (3/4" x 1/2") fits Stihl, Husqvarna, Partner, Makita
    List Price: $9.56
    Our Price: $6.56
    Deal of the Day Price: $3.72
    Part #: K20-WAT

    (10)
    List Price: $6.74
    Our Price: $4.49
    Part #: H51011
    List Price: $8.24
    Our Price: $5.49
    Sale Price: $2.99
    Part #: H70402

    (26)
    Walbro K20-WAT carburetor rebuild kit Lucas 2-cycle semi-synthetic oil 6.4 oz T-wrench 19mm x 13mm (3/4" x 1/2") fits Stihl, Husqvarna, Partner, Makita
    Quality aftermarket carburetor repair kit
    Fits: Stihl 017, 018, 021, 023, 025, MS210, MS230, MS250
    With Walbro carburetor
    Replaces OEM part(s): K20-WAT
    Lucas 2-Cycle Oil is an advanced technology smokeless 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
    The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
    User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

    6.4 oz size treats 2.5 gallons of gas at 50:1

    Order 24 for a case and receive 25% off.
    Quality aftermarket T-wrench Flathead x 19mm x 13mm (3/4" x 1/2")
    Fits: most chainsaws
    Lucas 2-cycle semi-synthetic oil 2.6 oz Air filter Homelite XL-2 NGK spark plug fits many chainsaws and cut off saws
    List Price: $4.49
    Our Price: $2.99
    Part #: H51010

    (1)
    List Price: $4.49
    Our Price: $2.99
    Part #: T605139
    List Price: $4.39
    Our Price: $2.79
    Part #: BPMR7A

    (21)
    Lucas 2-cycle semi-synthetic oil 2.6 oz Air filter Homelite XL-2 NGK spark plug BPMR7A
    Lucas 2-Cycle Oil is an advanced technology smokeless 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
    The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
    User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

    2.6 oz size treats 1 gallon of gas at 50:1

    Order 24 for a case and receive 25% off.
    Quality aftermarket air filter
    Fits: Homelite XL-2
    Replaces OEM part: D92702B, 69141
    NGK brand spark plug BPMR7A
    Fits: many models of chainsaw and cut off saws.
    Replaces: BOSCH WSR6F, CHAMPION CJ7Y
    *Buy 5 or more and receive a 20% discount!
    Bosch spark plug fits many chainsaws and cut off saws Torch spark plug fits Chainsaws, Cut Off Saws Spark plug wire 1' fits Stihl, Husqvarna, Wacker, Partner and others
    List Price: $4.19
    Our Price: $2.79
    Deal of the Day Price: $1.99
    Part #: WSR6F

    (49)
    List Price: $2.24
    Our Price: $1.69
    Part #: L7RTC

    (16)
    List Price: $2.24
    Our Price: $0.99
    Part #: H45001

    (6)
    Bosch spark plug fits many chainsaws and cut off saws Spark plug fits Stihl TS400 TS410 TS420 TS460 TS510 TS760 Spark plug wire by the foot
    Bosch brand spark plug WSR6F
    Fits: many models of chainsaw and cut off saws.
    Replaces: NGK BPM7A, CHAMPION CJ7Y
    *Buy 5 or more and receive a 20% discount!
    Torch brand spark plug
    Fits Stihl, Husqvarna, Partner, Wacker, Makita cut off saws, chainsaws, etc.
    Replaces: NGK BPM7A, Champion CJ7Y, Bosch WSR6F
    *Buy 5 or more and receive a 20% discount!
    New quality Spark plug wire
    5mm - "Sparky" type neoprene spark plug wire.
    Designed for chainsaws and trimmers.
    Will work with Husqvarna, Stihl, and others . Sold by the foot.
    Replaces Stihl pat: 0000 930 2251