You are here: Home > Chainsaw > Makita, Dolmar
We found 50 results matching your criteria.
Choose a sub category:
DCS34, DCS340, DCS341, DCS3416 DCS430, DCS431
DCS46018, DCS51018, DCS51020 DCS510
DCS5121, PS-510 DCS520, DCS5200I
DCS6401 DCS6421, PS-6400
DCS6800I DCS7900, DCS7901
DCS9010 EA3200, EA3201, PS-32C
EA3500, PS-35 EA4300, PS-421
EA5000, EA5001, PS-5105 EA6100, PS-6100
EA7300, EA7301, PS-7310 EA7900, EA7901, PS-7910
DCS400, DCS401 DCS7301

Makita Chainsaw Parts & Repair Parts


Looking for the Makita saw parts that you need to repair your chainsaws with? If so, you’re in the right place. We have all the Makita repair parts necessary to keep it running smoothly without any long-term wear or damage. A properly-maintained saw runs far more efficiently and is safe to use frequently. On the other hand, saws with worn out parts or a poorly-tuned engine are hazardous to use.


Check out our selection of Makita chainsaw parts for yourself! We offer the best prices around and carry useful tools to protect your saw from any damage. HL Supply offers piston rings, piston kits, engine oil, compression testers and more.

Sort By:
Page of 2
Makita 79cc Professional Gas Chain Saw - Power Head Only 32" Sugihara Light weight guide bar for Husqvarna large mount, 0.375 pitch, .063" guage 28" Sugihara Light weight guide bar for Husqvarna large mount, 0.375 pitch, .050" guage
Our Price: $859.99
Part #: EA7900PRZ
List Price: $187.07
Our Price: $170.06
Part #: VT3U-3Q80HV
List Price: $152.30
Our Price: $138.45
Part #: VT3U-0Q71HV

(2)
Free Shipping!
The Makita 79cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 79cc engine delivers 5.7 HP and an engine speed of 12,800 RPM, with an easy-starting automatic half-throttle lock and fully electronic ignition with optimized timing across all speed ranges. For extreme conditions, the slide-out baffle can be configured for efficient cold weather opera
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 32"
Guage: .063"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 105
Bar mount: D009
Fits: Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 28"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 93
Bar mount: D009
Fits: Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
24" Sugihara Light weight guide bar for Husqvarna large mount, 0.375 pitch, .050" guage 24" Sugihara Light weight guide bar for Husqvarna small mount, 0.375 pitch, .050" guage 20" Sugihara Light weight guide bar for Husqvarna large mount, 0.375 pitch, .050" guage
List Price: $152.30
Our Price: $106.22
Part #: VT3U-0Q62HV
List Price: $132.40
Our Price: $106.22
Part #: VH2U-0Q62HV
List Price: $132.40
Our Price: $85.73
Part #: VT3U-0Q50HV
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 24"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 84
Bar mount: D009
Fits: Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 24"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 84
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 20"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 72
Bar mount: D009
Fits: Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
20" Sugihara Light weight guide bar for Husqvarna small mount, 0.375 pitch, .050" guage 20" Sugihara Light weight guide bar for Husqvarna small mount, .325 pitch, .050" guage 18" Sugihara Light weight guide bar for Husqvarna small mount, 3/8 pitch, .050" guage
List Price: $132.40
Our Price: $85.73
Part #: VH2U-0Q50HV
List Price: $106.22
Our Price: $85.73
Part #: VH2U-0J50HV
List Price: $106.22
Our Price: $83.05
Part #: VH2U-0Q45HV
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 20"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 72
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 20"
Guage: .050"
Bar type: Light weight
Nose size: .325
Teeth count:
Drive links: 80
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 18"
Guage: .050"
Bar type: Light weight
Nose size: 3/8
Teeth count:
Drive links: 68
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
18" Sugihara Light weight guide bar for Husqvarna small mount, .325 pitch, .050" guage Dolmar PS 7900, Makita DCS 6401, 6421 big bore cylinder kit 54mm 16" Sugihara Light weight guide bar for Husqvarna small mount, 3/8 pitch, .050" guage
List Price: $106.22
Our Price: $83.05
Part #: VH2U-0J45HV
List Price: $134.39
Our Price: $111.99
Sale Price: $82.99
Part #: H30640-B

(7)
List Price: $85.73
Our Price: $80.39
Part #: VH2U-0Q40HV
Dolmar PS 7900, Makita DCS 6401, 6421 big bore cylinder piston assembly 54mm
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 18"
Guage: .050"
Bar type: Light weight
Nose size: .325
Teeth count:
Drive links: 72
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Quality aftermarket big bore kit. 54mm bore.
High quality Nikasil plated. Has hole for decompression valve
Fits: Dolmar PS 7900, Makita DCS 6401, 6421 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 16"
Guage: .050"
Bar type: Light weight
Nose size: 3/8
Teeth count:
Drive links: 60
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
16" Sugihara Light weight guide bar for Husqvarna small mount, .325 pitch, .050" guage 24" Raisman Hard Nose guide bar for Dolmar, Husqvarna, Medium - 1.33" pitch, .058" Gauge 20" Raisman Hard Nose guide bar for Dolmar, Husqvarna, Medium - 1.33" pitch, .058" Gauge
List Price: $85.73
Our Price: $80.39
Part #: VH2U-0J40HV
List Price: $52.99
Our Price: $46.99
Part #: 10-24-266-2
List Price: $52.99
Our Price: $46.99
Part #: 10-20-266-2
SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 16"
Guage: .050"
Bar type: Light weight
Nose size: .325
Teeth count:
Drive links: 66
Bar mount: K095
Fits: Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Raisman brand high quality chainsaw guide bar.
Length: 24"
Gauge: .058"
Bar type: Hard Nose
Nose size: Medium - 1.33"
Teeth count: N/A
Drive links: 84
Bar mount: D009
Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
Raisman brand high quality chainsaw guide bar.
Length: 20"
Gauge: .058"
Bar type: Hard Nose
Nose size: Medium - 1.33"
Teeth count: N/A
Drive links: 72
Bar mount: D009
Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
18" Raisman Hard Nose guide bar for Dolmar, Husqvarna, Medium - 1.33" pitch, .058" Gauge 25 Pack - NGK spark plug fits many chainsaws and cut off saws Gasoline engine compression tester
List Price: $52.99
Our Price: $46.99
Part #: 10-18-266-2
List Price: $59.99
Our Price: $49.99
372 vs MS660 Sale!: $37.49
Part #: BPMR7A-S25
List Price: $59.99
Our Price: $39.99
Sale Price: $29.99
Part #: H70900

(6)
NGK spark plug BPMR7A Shop Pack 25 Chainsaw compression tester
Raisman brand high quality chainsaw guide bar.
Length: 18"
Gauge: .058"
Bar type: Hard Nose
Nose size: Medium - 1.33"
Teeth count: N/A
Drive links: 68
Bar mount: D009
Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
NGK brand spark plug BPMR7A - Shop Pack 25
Fits: many models of chainsaw and cut off saws.
Replaces: BOSCH WSR6F, CHAMPION CJ7Y
Gasoline engine compression tester
Fitted with 65mm gauge having two scales (psi and kPa), reading from 0-300psi and 0-2100kPa.
Includes quick coupling 150mm rigid stem with cone-type adapter and 320mm flexible adapter with 14mm and 18mm screw in adapters.
Use this tool to check your chainsaws, cut off saws, lawnmowers, and other small engines.
Genuine Makita EA7900, EA7901 Air Filter Cartridge Makita, Dolmar DPC PC 7300, 7301piston kit 50mm Makita, Dolmar DCS 7900, 7901 piston kit 52mm
List Price: $25.99
Our Price: $22.99
Part #: 038-173-310
List Price: $28.99
Our Price: $21.49
Part #: H31731

(1)
List Price: $28.99
Our Price: $21.49
Part #: H31790

(1)
Makita, Dolmar chainsaw piston assembly Makita, Dolmar chainsaw piston assembly
Genuine OEM Air Filter Cartridge
Fits Makita chainsaws: EA7900PR, EA7901PR, Dolmar: PS-7910, PS-7910H
Part number: 038-173-310
Quality aftermarket piston kit. 50mm.
Fits: Makita, Dolmar DPC, PC, 7300, 7301 chainsaws
Includes: piston, rings, wrist pin, cir clips
Replaces OEM part: 394 132 111
Quality aftermarket kit. 52mm.
Fits: Makita, Dolmar DCS, PC, 7900, 7901 chainsaws
Includes: piston, rings, wrist pin, cir clips
Replaces OEM part: 038 132 000
Genuine Makita DCS7301, DCS7901 Air Filter 20" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .058" Gauge 20" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .050" Gauge
List Price: $21.99
Our Price: $19.99
Part #: 038-173-101
List Price: $24.99
Our Price: $18.99
Part #: 13-20-426A2

(1)
List Price: $23.99
Our Price: $17.99
Part #: 13-20-426A1

(1)
Genuine OEM Air Filter
Fits Makita chainsaws: DCS6401, DCS7301, DCS7901, Dolmar: PS6400, PS7300, PS7900
Part number: 038-173-101
Raisman brand high quality chainsaw guide bar.
Length: 20"
Gauge: .058"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 72
Bar mount: K095
Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Raisman brand high quality chainsaw guide bar.
Length: 20"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 72
Bar mount: K095
Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
20" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .050" Gauge 18" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .058" Gauge 18" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .050" Gauge
List Price: $23.99
Our Price: $17.99
Part #: 13-20-266A1

(1)
List Price: $23.99
Our Price: $17.99
Part #: 13-18-266A2
List Price: $23.99
Our Price: $17.99
Part #: 13-18-266A1
Raisman brand high quality chainsaw guide bar.
Length: 20"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 72
Bar mount: D009
Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
Raisman brand high quality chainsaw guide bar.
Length: 18"
Gauge: .058"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 68
Bar mount: D009
Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
Raisman brand high quality chainsaw guide bar.
Length: 18"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 11
Drive links: 68
Bar mount: D009
Fits: Dolmar, Efco, Husqvarna, Jonsered, Makita, Partner, Poulan/PoulanPro, Shindaiwa (SDK), Solo
16" Raisman Sprocket Nose guide bar for Dolmar, Husqvarna, 3/8" pitch, .050" Gauge Caber piston rings 50mm fits Stihl 044, MS440, MS441, TS410, TS420, Makita, Dolmar 73XX Caber piston rings 52mm fits Stihl 046, MS460, 064, MS640, MS650, Dolmar/Makita 7900, 7901
List Price: $21.99
Our Price: $15.99
Part #: 13-16-426A1
List Price: $22.49
Our Price: $13.99
372 vs MS660 Sale!: $10.49
Part #: CR5012

(4)
List Price: $22.49
Our Price: $13.99
372 vs MS660 Sale!: $10.49
Part #: CR5212

(5)
Caber piston rings set 50mm x 1.2mm Stihl 046, MS460, 064, MS640, MS650 & Dolmar / Makita 7900, 7901 piston rings set 52mm
Raisman brand high quality chainsaw guide bar.
Length: 16"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count:
Drive links: 60
Bar mount: K095
Fits: Cub Cadet, Dolmar, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, McCulloch, Olympyk (Oleo-Mac)
Caber brand F-cast piston rings set
Highest quality made in Italy. Exceeds OEM specifications.
Fits: Stihl 044, MS440, MS441, TS410, TS420, Husqvarna 371, 372 (EPA), Makita DPC 7300, 7301, 7310, 7311, 7320, 7321, 7331 and 7300, Dolmar PC 7312, 7314 and 7300, Wacker BTS 930, 935, 1030,1035 cut off saws
Replaces OEM part: 1128 034 3000 50mm x 1.2mm *
See Technical Specs for more information
Caber brand F-cast piston rings set
Highest quality made in Italy. Exceeds OEM specifications.
Fits: Stihl 046, 064, Big Bore 044, MS460, MS650, Husqvarna 372 Big Bore, Dolmar/Makita 7900, 7901 chainsaw
Replaces OEM part: 1122 034 3000, 038 132 020 52mm x 1.2mm *
See Technical Specs for more information
Makita/Dolmar/Wacker cut off saw starter spring AMSOIL Semi-Synthetic Bar and Chain Oil 1 qt (32 oz) Hyway decompression valve fits Stihl, Partner, Husqvarna, Makita
List Price: $14.99
Our Price: $9.99
Part #: H62730
List Price: $11.99
Our Price: $7.99
Part #: H51015
List Price: $14.99
Our Price: $9.99
372 vs MS660 Sale!: $7.49
Part #: H11280

(23)
Makita / Dolmar / Wacker cut off saw starter spring AMSOIL Semi-Synthetic Bar and Chain Oil Decompression valve fits Stihl / Partner / Husqvarna / Makita
Quality aftermarket recoil starter spring.
Fits: the Makita, Dolmar, Speedicut, and Wacker cut-off saw.
Replaces OEM part: Makita 020163031, Dolmar 181163050, Speedicut 606115, and Wacker 0129057
Tacky formula clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection. Anti-wear additives extend the life of bar and chain applications. Ideal for chainsaws.
  • 1 quart (32 oz) size.
  • Hyway brand high quality decompression valve.
    Fits: Stihl, Partner, Husqvarna, Makita, Wacker, Dolmar, etc. chainsaws and cut off saws
    Replaces OEM part:'s: 1128 020 9400, 503 71 53-01, 001-131-150
    Star Tron 8 oz. Enzyme Fuel Treatment Genuine Makita EA7900, EA7901 Air Pre-Filter Lucas High Performance 2-cycle semi-synthetic oil 1 pint (16 oz)
    List Price: $12.74
    Our Price: $8.49
    372 vs MS660 Sale!: $6.37
    Part #: H51004

    (2)
    List Price: $7.99
    Our Price: $5.99
    Part #: 038-173-350
    List Price: $11.24
    Our Price: $7.49
    372 vs MS660 Sale!: $5.62
    Part #: H51012

    (1)
    Star Tron 8 oz. Enzyme Fuel Treatment Lucas 2-cycle semi-synthetic oil 6.4 oz
    Star Tron Enzyme Fuel Treatment is a revolutionary new fuel additive using enzyme technology to enhance the performance of boats, automobiles, trucks, RVs, tractors, farm equipment, generators, lawn mowers, lawn equipment, oil burning furnaces and all other small engines.

    Stabilizes Gas
    Gas fuels break down rapidly which results in lost power and poor performance. Star Tron stabilizes the fuel chemistry for up to two years in gas

    Eliminates, Prevents Ethanol Fuel Problems
    Ethanol, E10 fuels increase the amounts of water and sludge in your fuel tank. Star Tron breaks down this excess water and sludge to sub-micron size allowing it to be safely burned away during normal engine operation. Therefore Star Tron prevents phase separation and fuel gelling, eliminating ethanol fuel problems.

    8 oz. Small Engine Star Tron formula treats 48 gallons of fuel

    This item is considered Hazardous Material and can only be shipped ground carrier.
    Genuine OEM Air Pre-Filter
    Fits Makita chainsaws: EA7900PR, EA7901PR, Dolmar: PS-7910, PS-7910H
    Part number: 038-173-101
    Lucas High Performance Semi-Sythetic 2 CYCLE Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines.
    Designed for any oil injection system or pre mix up to 50:1. Use in Snowmobiles, Weed Eaters, Leaf Blowers, Chain Saws, and more.

    Lucas 2-Cycle Oil is an advanced technology 'smokeless' 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
    The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
    User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

    16 oz size treats 6 gallons of gas at 50:1

    Order 12 for a case and receive 25% off.