You are here: Home > Wacker > Wacker WM80
We found 24 results matching your criteria.
Sort By:
Page of 1
Cross Performance Wacker WM80 cylinder kit Wacker WM80 crankshaft Wacker WM80, WM90 muffler
List Price: $129.99
Our Price: $109.99
Sale Price: $79.99
Part #: CP30080

(2)
List Price: $119.99
Our Price: $79.99
Part #: R8054010

(1)
List Price: $82.49
Our Price: $54.99
Part #: R9801300
Wacker WM80 cylinder kit Wacker WM80 crankshaft Wacker WM80 WM90 muffler
Premium quality Nikasil plated cylinder kit by Cross Performance. 45mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Wacker WM80
Replaces OEM part: 99336
Quality aftermarket replacement crankshaft
Fits: Wacker WM80 rammer, compactor
Replaces OEM part: WACKER 45036
Quality aftermarket replacement muffler
Fits: Wacker WM80, WM90 rammer, compactor
Replaces OEM part: WACKER 114770
Wacker WM80 ignition coil Wacker WM80 starter cover assembly Wacker WM80 OEM crankcase bearing set
List Price: $49.99
Our Price: $29.99
Part #: H45080

(3)
List Price: $59.99
Our Price: $39.99
Sale Price: $29.99
Part #: H60080

(2)
List Price: $38.99
Our Price: $25.99
Part #: W0034835
Wacker WM80 ignition coil / magneto assembly Wacker WM80 starter recoil cover assembly Wacker WM80 OEM piston pin needle bearing
Quality aftermarket ignition coil
Fits: Wacker WM80 rammer, compactor
Replaces OEM part: WACKER 103302, 49598
Quality aftermarket replacement starter recoil assembly
Fits: Wacker WM80 rammer, compactor
Replaces OEM part: WACKER 0046098
Original Wacker OEM crankcase bearing set of 2
Fits: rammer, compactor Part # 0034835
Fits: the following models: WM80, BS50-2, BS50-2i, BS500-oi, BS500s, BS500, BS60-2i, BS600-oi, BS600s, BS600, BS650, BS70-2i, BS700-oi, BS700, BS45y, BS52y, BS60y, BS62y, BS65y
Wacker WM80 piston kit Wacker WM80 crankcase bearing set Wacker WM80 rammer OEM gasket set with seals
List Price: $37.49
Our Price: $24.99
Part #: H31080

(1)
List Price: $28.49
Our Price: $18.99
Part #: H32835

(2)
List Price: $23.99
Our Price: $15.99
Part #: W00178827

(3)
Wacker WM80 piston assembly Wacker WM80 crankcase bearing set 0034835 Wacker WM80 rammer OEM gasket set with seals
Quality aftermarket kit
Fits: Wacker WM80 rammer / compactor
Replaces OEM part: 45908
Includes: piston, rings, wrist pin, circlips
Quality aftermarket crankcase bearing set
Fits: Wacker WM80 rammer, compactor.
Replaces OEM part: 0034835
Original OEM Wacker crankcase gasket . Part # 0178827
Fits: WM80, BS50-2, BS50-2i, BS500-oi, BS500s, BS500, BS60-2i, BS600-oi, BS600s, BS600, BS650, BS70-2i, BS700-oi, BS700, BS45y, BS52y, BS60y, BS62y, BS65y
Wacker WM80 OEM piston pin needle bearing Tillotson RK-35HS carburetor rebuild kit Caber piston rings 45mm fits Stihl 029, 032, Husqvarna 51, 254, 350, 353, Wacker WM80
List Price: $19.49
Our Price: $12.99
Part #: W0182662
List Price: $14.99
Our Price: $9.99
Part #: RK-35HS

(3)
List Price: $13.49
Our Price: $9.99
Part #: CR4515

(6)
Wacker WM80 OEM piston pin needle bearing Tillotson RK-35HS carburetor rebuild kit Caber piston rings set 45mm x 1.5mm
Original Wacker OEM piston pin needle cage bearing
Fits: rammer, compactor Part # 0182662
Fits: the following models: WM80, BS50-2, BS50-2i, BS500-oi, BS500s, BS500, BS60-2i, BS600-oi, BS600s, BS600, BS650, BS70-2i, BS700-oi, BS700, BS45y, BS52y, BS60y, BS62y, BS65y
Quality aftermarket carburetor repair kit
Fits: Wacker Rammers BS-50-2, BS50-2i, BS-60-2, BS60-2i, BS-70-2, BS70-2i.
Replaces OEM part: RK-35HS
Made by Raisman in Brazil.
Caber brand F-cast piston rings set
Highest quality made in Italy. Exceeds OEM specifications.
Fits: Stihl 029, 032, Husqvarna 51, 254, 350, 353, Wacker WM80
(Later 029's (before serial # X 39 305 257) have a 46mm piston, earlier 350's have a 44mm piston. Please verify before ordering.)
Replaces OEM part:'s: 1113 034 3006, 503 28 90-11, 45904
45mm x 1.5mm
*See Technical Specs for more information
Wacker WM80 piston rings Star Tron 8 oz. Enzyme Fuel Treatment Lucas High Performance 2-cycle semi-synthetic oil 1 pint (16 oz)
List Price: $14.99
Our Price: $9.99
Part #: R6265450

(1)
List Price: $12.74
Our Price: $8.49
Part #: H51004

(2)
List Price: $11.24
Our Price: $7.49
Part #: H51012

(1)
Wacker WM80 piston rings Star Tron 8 oz. Enzyme Fuel Treatment Lucas 2-cycle semi-synthetic oil 6.4 oz
Quality aftermarket piston rings Set of two
Fits: Wacker WM80 rammer, compactor
Replaces OEM part: WACKER 45904
Star Tron Enzyme Fuel Treatment is a revolutionary new fuel additive using enzyme technology to enhance the performance of boats, automobiles, trucks, RVs, tractors, farm equipment, generators, lawn mowers, lawn equipment, oil burning furnaces and all other small engines.

Stabilizes Gas
Gas fuels break down rapidly which results in lost power and poor performance. Star Tron stabilizes the fuel chemistry for up to two years in gas

Eliminates, Prevents Ethanol Fuel Problems
Ethanol, E10 fuels increase the amounts of water and sludge in your fuel tank. Star Tron breaks down this excess water and sludge to sub-micron size allowing it to be safely burned away during normal engine operation. Therefore Star Tron prevents phase separation and fuel gelling, eliminating ethanol fuel problems.

8 oz. Small Engine Star Tron formula treats 48 gallons of fuel

This item is considered Hazardous Material and can only be shipped ground carrier.
Lucas High Performance Semi-Sythetic 2 CYCLE Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines.
Designed for any oil injection system or pre mix up to 50:1. Use in Snowmobiles, Weed Eaters, Leaf Blowers, Chain Saws, and more.

Lucas 2-Cycle Oil is an advanced technology 'smokeless' 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

16 oz size treats 6 gallons of gas at 50:1

Order 12 for a case and receive 25% off.
Ductile split groove piston ring 45mm fits Husqvarna 51, 254, Stihl 029, Wacker WM80 Needle cage bearing replaces Stihl 9512-003-3061 Lucas 2-cycle semi-synthetic oil 6.4 oz
List Price: $8.24
Our Price: $5.49
Part #: H04515

(2)
List Price: $6.74
Our Price: $4.99
Part #: H121515-A

(5)
List Price: $6.74
Our Price: $4.49
Part #: H51011
Husqvarna 51 piston ring 45mm Stihl 044, 046, MS311, MS362, MS391, MS440, MS460 piston pin bearing needle cage Lucas 2-cycle semi-synthetic oil 6.4 oz
High quality ductile split groove piston ring
Fits: Husqvarna 51, 254, Stihl 029 chainsaws, Wacker WM80 rammer
Replaces OEM part: 503 28 90-11
45mm x 1.5mm
Quality aftermarket piston pin bearing
Fits: Stihl 044, 046, MS311, MS362, MS391, MS440, MS441, MS460, MS461, Wacker WM80
Replaces OEM part: number 9512 003 3061, 0182662
Lucas 2-Cycle Oil is an advanced technology smokeless 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

6.4 oz size treats 2.5 gallons of gas at 50:1

Order 24 for a case and receive 25% off.
Piston Ring 2pcs, 45mmx1.5mm AMSOIL SABER Professional Synthetic 2-Stroke Oil 3.5 oz Lucas 2-cycle semi-synthetic oil 2.6 oz
List Price: $5.49
Our Price: $3.99
Part #: H4515
List Price: $5.99
Our Price: $3.99
Part #: H51020
List Price: $4.49
Our Price: $2.99
Part #: H51010

(1)
AMSOIL SABER Professional Synthetic 2-Stroke Oil Lucas 2-cycle semi-synthetic oil 2.6 oz
Quality aftermarket Piston Ring - 2pcs, 45mmx1.5mm
For: Stihl 034 (not Super), Stihl MS191T, MS280, FS420, FS550
Replaces OEM part(s) #: 1113 034 3006, 503 28 90-11
One Oil Covers All Mix Ratios.
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power equipment such as chainsaws and lawn/utility equipment.
3.5 oz size treats 1.3 gallons of gas at 50:1
Lucas 2-Cycle Oil is an advanced technology smokeless 2-stroke oil formulated from a special blend of mineral oil, synthetic oil and a low ash additive package containing fortified dispersant inhibitors.
The end result is a more thorough burning of the fuel resulting in more power and fewer emissions for a safe operator environment.
User can expect less fuel consumption and no more filter clogging! The special lubricants in the Lucas 2-stroke oil allow for a much easier piston travel; this condition allows for more net power and less ring and cylinder wear.

2.6 oz size treats 1 gallon of gas at 50:1

Order 24 for a case and receive 25% off.
AMSOIL SABER Professional Synthetic 2-Stroke Oil (pillow pack) 1.5 oz Wacker WM80 rammer OEM crankcase gasket Wacker WM80 rammer OEM cylinder gasket
List Price: $3.74
Our Price: $2.49
Part #: H51019
List Price: $3.38
Our Price: $2.25
Part #: W0045034

(1)
List Price: $2.99
Our Price: $1.99
Part #: W0045910

(1)
AMSOIL SABER Professional Synthetic 2-Stroke Oil Wacker WM80 rammer OEM crankcase gasket Wacker WM80 rammer OEM cylinder gasket
One Oil Covers All Mix Ratios.
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power equipment such as chainsaws and lawn/utility equipment.
2 x 1.5 oz size treats 1 gallon of gas at 50:1
Original OEM Wacker crankcase gasket Part # 0045034
Fits: Wacker WM80, BS50-2, BS50-2i, BS500-oi, BS500s, BS500, BS60-2i, BS600-oi, BS600s, BS600, BS650, BS70-2i, BS700-oi, BS700, BS45y, BS52y, BS60y, BS62y, BS65y
Original OEM Wacker cylinder base gasket # 0045910
Fits: Wacker WM80, BS50-2, BS50-2i, BS500-oi, BS500s, BS500, BS60-2i, BS600-oi, BS600s, BS600, BS650, BS70-2i, BS700-oi, BS700, BS45y, BS52y, BS60y, BS62y, BS65y