You are here: Home > Chainsaw > Stihl
Choose a sub category:
08 09, 010 & 011 MS150
MS193T MS271 MS461
MS462 015 019
017, 018, MS170, MS180 MS171 MS181
MS191 MS192T, MS191T 020T, MS200T
MS201T 021, 023, 025, MS210, MS230, MS250 MS211
MS231 024, 026, MS240, MS260 MS241
MS251 MS261 MS270, MS280
028 029, 039, MS290, MS310, MS390 MS291
031 MS311 032
034, 036, MS360 MS361 MS362
038, MS380 MS381 MS391
041 042 044, MS440
MS441 045 046, MS460
048 050 051
056 064, 066, MS650, MS660 MS661
070, 090 075, 076 MS780
084 088, MS880 MS341

Stihl Replacement Parts

For over 80 years, Stihl has been an industry leader in handheld outdoor power equipment and is a trusted name among professional contractors and homeowners alike. At HL Supply, we carry a large selection of Stihl replacement parts for a variety of Stihl power equipment including trimmers, blowers, and chainsaws. However, our primary focus is on Stihl chainsaw parts.

Stihl Chainsaw Parts

Our inventory of Stihl chainsaw repair parts includes fuel filters, starter ropes, carburetors, clutch assemblies and much more. These high quality aftermarket Stihl chainsaw parts are direct OEM replacements and fit a variety of Stihl models. From original replacement parts from Walbro to high quality aftermarket parts, HL Supply has you covered.

If you have any questions about our Stihl repair parts, feel free to give us a call at (386) 256-4891 and speak to one of our Stihl parts experts today.

Sort By:
Page of 29
Complete Repair Parts for Stihl 070 Complete Repair Parts for Stihl 070

Quality aftermarket Complete Repair Parts
For: Stihl 070
This kit is has all the parts needed to repair your chainsaw.
We do not recommend building a saw from this kit and would not be covered under warranty.

Our Price: $342.49
Part #: CS07000A

(2)
Complete Repair Parts for Stihl MS660, MS650, 066 Complete Repair Parts for Stihl MS660, MS650, 066

Quality aftermarket Complete Repair Parts
For: Stihl MS660, MS650, 066
This kit is has all the parts needed to repair your chainsaw.
We do not recommend building a saw from this kit and would not be covered under warranty.

Our Price: $325.79
Sale Price: $271.49
Part #: CS66020A

(29)
Complete Repair Parts for Stihl MS440, 044 Complete Repair Parts for Stihl MS440, 044

Quality aftermarket Complete Repair Parts
For: Stihl MS440, 044
This kit is has all the parts needed to repair your chainsaw.
We do not recommend building a saw from this kit and would not be covered under warranty.

Our Price: $271.49
Part #: CS44020A

(2)
Complete Repair Parts for Stihl MS361, MS341 Complete Repair Parts for Stihl MS361, MS341

Quality aftermarket Complete Repair Parts
For: Stihl MS361, MS341
This kit is has all the parts needed to repair your chainsaw.
We do not recommend building a saw from this kit and would not be covered under warranty.

Our Price: $277.79
Sale Price: $231.49
Part #: CS36120A
Complete Repair Parts for Stihl MS360, 036, 034 Complete Repair Parts for Stihl MS360, 036, 034

Quality aftermarket Complete Repair Parts
For: Stihl MS360, 036, 034
This kit is has all the parts needed to repair your chainsaw.
We do not recommend building a saw from this kit and would not be covered under warranty.

Our Price: $231.49
Part #: CS36020A

(5)
Stihl 084 cylinder kit 60mm Cross Performance Stihl 084 cylinder kit 60mm

Premium quality Nikasil plated cylinder kit by Cross Performance. 60mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl 084 chainsaws
Replaces OEM part: 1124 020 1203

Our Price: $199.99
Part #: CP30084

(5)
36" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .063" gauge 36" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .063" gauge

SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 36"
Guage: .063"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 114
Bar mount: D025
Fits: Stihl 044, 045, 046, 048, 056, 064, 066, 088, MS440, MS441, MS460, MS461, MS650, MS660, MS880

Our Price: $187.07
Part #: ST2U-3Q90HV
32" Sugihara Light weight Bar and Chain Combo for Stihl large mount, 0.375 pitch, .063" gauge 32" Sugihara Light weight Bar and Chain Combo for Stihl large mount, 0.375 pitch, .063" gauge

SugiHara brand bar and chain combo
Made in Japan. Highest Quality.
Length: 32"
Nose size: 0.375", 3/8" Std
Drive links: 105

Our Price: $237.99
Sale Price: $172.99
Part #: ST2U-3Q80HV-DNS
Cross Performance Stihl TS700, TS800 cylinder kit Rebuild Kit Cross Performance Stihl TS700, TS800 cylinder kit Rebuild Kit

Premium quality Nikasil plated cylinder kit by Cross Performance. 56mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl TS700, TS800
Replaces OEM part: 4224 020 1202
Comes complete with gaskets, bearing, spark plug

Our Price: $222.99
Sale Price: $162.99
Part #: CP30800-DNS
Stihl chainsaw big bore kit for Stihl 066, MS650, MS660 overhaul Stihl 066, MS650, MS660 big bore + overhaul kit

Big bore kit. 56mm bore.
High quality Nikasil plated.
Fits: Stihl 066, MS650, MS660 chainsaw.
Includes: Stihl chainsaw cylinder kit, dual port muffler, gasket set, oil seals, piston pin bearing, decompression valve, spark plug. Includes Free Accessories!
Replaces OEM part: 1122 020 1211

Our Price: $216.99
Sale Price: $157.99
Part #: H30660-B-DNS

(12)
32" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .063" gauge 32" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .063" gauge

SugiHara brand bar and chain combo
Made in Japan. Highest Quality.
Length: 32"
Nose size: 0.375", 3/8" Std
Drive links: 105

Our Price: $152.30
Part #: ST2U-3Q80HV

(2)
28" Sugihara Light weight Bar and Chain Combo for Stihl large mount, 0.375 pitch, .063" gauge 28" Sugihara Light weight Bar and Chain Combo for Stihl large mount, 0.375 pitch, .063" gauge

SugiHara brand chainsaw bar and chain combo.
Made in Japan. Highest Quality.
Length: 28"
Guage: .063"
Bar type: Light weight
Nose size: 0.375", 3/8" Std
Drive links: 92

Our Price: $206.99
Sale Price: $150.99
Part #: SV3U-3Q70HV-DNS
28" Sugihara Light weight guide Bar and Chain Combo for Stihl large mount, 0.375 pitch, .050" gauge 28" Sugihara Light weight guide Bar and Chain Combo for Stihl large mount, 0.375 pitch, .050" gauge

SugiHara brand chainsaw guide bar and chain combo.
Made in Japan. Highest Quality.
Length: 28"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 91
Bar mount: D025
Fits: Stihl 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 043, 044, 045, 046, 048, 056, 064, 066, 088, MS260, MS261, MS270, MS271, MS280, MS290, MS291, MS310, MS311, MS360, MS361, MS362, MS390, MS391, MS440, MS441, MS460, MS461, MS650, MS660, MS880

Our Price: $206.99
Sale Price: $150.99
Part #: SV3U-0Q70HV-DNS

(1)
Stihl chainsaw cylinder kit for Stihl 044 MS440 big bore overhaul kit 52mm Hyway Stihl 044 MS440 big bore cylinder kit 52mm - 12mm pin + overhaul

Hyway brand Stihl chainsaw cylinder kit
High quality Nikasil plated.
These Stihl chainsaw parts fit 044 MS440 chain saws.
Includes: cylinder kit, dual port muffler, decompression valve, spark plug, gasket set, oil seals
Replaces OEM part: 1128 020 1227 52mm bore *Older 044 chainsaws made before serial number X29 382 283 have a 10mm wrist pin. There are a few rare chainsaws that are after that serial number that also have a 10mm wrist pin. Please verify your pin size before ordering. Includes Free Accessories.

Our Price: $207.99
Sale Price: $150.99
Part #: H30440-B-DNS

(4)
Stihl chainsaw big bore kit for Stihl 046, MS460 overhaul 54mm Hyway Stihl 046, MS460 big bore cylinder kit 54mm + overhaul kit

Hyway brand Stihl chainsaw big bore kit. 54mm bore.
High quality Nikasil plated. Has hole for decompression valve.
Fits: Stihl 046 chain saw, and Stihl MS460 chainsaw
Includes: Stihl chainsaw cylinder kit, dual port muffler, decompression valve, spark plug, gasket set, oil seals. Includes Free Accessories.

Our Price: $205.99
Sale Price: $149.99
Part #: H30460-B-DNS

(9)
Short Block Kit 49mm for Stihl MS390, MS290 Replaces 1127-020-1216 Short Block Kit 49mm for Stihl MS390, MS290 Replaces 1127-020-1216

Quality aftermarket Short Block Kit 49mm
Fits: Stihl MS390, MS290
Replaces OEM part(s) #: 1127 020 1216, 1127 030 0402

Our Price: $145.99
Part #: H30398

(2)
Stihl MS461 chainsaw cylinder kit 1128 020 1250 Meteor Stihl MS461 cylinder kit 52mm replaces 1141-020-1200

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit.
Fits: Stihl MS461 chainsaw. 52mm bore.
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1141 020 1200

Our Price: $144.99
Part #: MCC2516
Cross Performance Stihl TS410, TS420 cylinder kit Rebuild Kit Cross Performance Stihl TS410, TS420 cylinder kit Rebuild Kit

Premium quality Nikasil plated cylinder kit by Cross Performance. 50mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl TS410, TS420
Replaces OEM part: 4238 020 1202
Comes complete with gaskets, bearing, spark plug, air filter

Our Price: $198.99
Sale Price: $144.99
Part #: CP30410-DNS

(3)
Raisman 2 Stroke Full Synthetic Oil, No-smoke, 1 Case (48 x 100 ml) Raisman 2 Stroke Full Synthetic Oil, No-smoke, 1 Case (48 x 100 ml)

High quality 2-cycle oil by Raisman 1 Case (48 x 100 ml)
Full-synthetic with fuel stabilizers. Meets OEM specs ISO-L-EGD and JASO FD.
Made in USA

Our Price: $184.99
Sale Price: $134.99
Part #: 81-40-081-DNS
Meteor Stihl 044, MS440 cylinder piston assembly 50mm Meteor Stihl 044, MS440 cylinder kit 50mm - 12mm pin

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 044, MS440 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing. 50mm bore with 12mm pin.
Replaces OEM part: 1128 020 1227
*Older 044 chainsaws made before serial number X29 382 283 have a 10mm wrist pin. There are a few rare chainsaws that are after that serial number that also have a 10mm wrist pin. Please verify your pin size before ordering.

Our Price: $133.99
Part #: MCC2084

(7)
Meteor Stihl 046, MS460 cylinder piston assembly 52mm Meteor Stihl 046, MS460 cylinder kit 52mm

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 046, MS460 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing. 52mm bore
Replaces OEM part: 1128 020 1217

Our Price: $133.99
Part #: MCC1833

(6)
28" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .063" gauge 28" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .063" gauge

SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 28"
Guage: .063"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 92
Bar mount: D025
Fits: Stihl 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 043, 044, 045, 046, 048, 056, 064, 066, 088, MS260, MS261, MS270, MS271, MS280, MS290, MS291, MS310, MS311, MS360, MS361, MS362, MS390, MS391, MS440, MS441, MS460, MS461, MS650, MS660, MS880

Our Price: $132.40
Part #: SV3U-3Q70HV
28" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .050" gauge 28" Sugihara Light weight guide bar for Stihl large mount, 0.375 pitch, .050" gauge

SugiHara brand chainsaw guide bar.
Made in Japan. Highest Quality.
Length: 28"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 91
Bar mount: D025
Fits: Stihl 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 043, 044, 045, 046, 048, 056, 064, 066, 088, MS260, MS261, MS270, MS271, MS280, MS290, MS291, MS310, MS311, MS360, MS361, MS362, MS390, MS391, MS440, MS441, MS460, MS461, MS650, MS660, MS880

Our Price: $132.40
Deal of the Day Price: $99.99
Part #: SV3U-0Q70HV

(2)
Meteor Stihl 066 MS660 cylinder piston assembly 54mm Meteor Stihl 066, MS650, MS660 cylinder kit 54mm

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 066, MS650*, MS660 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing. 54mm bore.
Replaces OEM part: 1122 020 1211
*Larger than standard MS650

Our Price: $130.99
Deal of the Day Price: $99.99
Part #: MCC1756

(9)
Stihl MS261 chainsaw cylinder kit 1141 020 1200 Meteor Stihl MS261 cylinder kit 44.7mm replaces 1141-020-1200

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit.
Fits: Stihl MS261 chainsaw. 44.7mm bore.
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1141 020 1200

Our Price: $129.99
Part #: MCC2515
Stihl TS700, TS800 cylinder kit Cross Performance Stihl TS700, TS800 cylinder kit

Premium quality Nikasil plated cylinder kit by Cross Performance. 56mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl TS700, TS800
Replaces OEM part: 4224 020 1202

Our Price: $129.99
Part #: CP30800

(1)
Meteor Stihl 044, MS440 cylinder piston assembly 50mm Meteor Stihl 044, MS440 cylinder kit 50mm - 10mm pin

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 044, MS440 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing. 50mm bore with 10mm pin.
Replaces OEM part: 1128 020 1227
*Older 044 chainsaws made before serial number X29 382 283 have a 10mm wrist pin. There are a few rare chainsaws that are after that serial number that also have a 10mm wrist pin. Please verify your pin size before ordering.

Our Price: $173.49
Sale Price: $128.49
Part #: MCC2147

(2)
Meteor Stihl 026, MS260 cylinder assembly Meteor Stihl 026, MS260 cylinder kit 44mm

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 026, MS260 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing. 44mm bore.
Replaces OEM part: 1121 020 1203, 1121 020 1208

Our Price: $173.49
Sale Price: $128.49
Part #: MCC1668

(2)
Meteor Stihl 020T, MS200T cylinder piston assembly Meteor Stihl 020T, MS200T cylinder kit 40mm

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 020T, MS200T chainsaw.
Has hole for decompression valve. 40mm bore.
Replaces OEM part: 1129 020 1202

Our Price: $127.99
Part #: MCC2055

(2)
Meteor Stihl 036 MS360 cylinder piston assembly 48mm Meteor Stihl 036, MS360 cylinder kit 48mm

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl 036, MS360 chainsaw Has hole for decompression valve
Includes: cylinder, piston, rings, wrist pin, cir clips. 48mm bore.
Replaces OEM part: 1125 020 1215, 1125 020 1213

Our Price: $127.99
Part #: MCC1458

(10)
Chainsaw Mill For 36" Or Less Chainsaw Chainsaw Mill For 36" Or Less Chainsaw

Quality aftermarket Chainsaw Mill
For 36" Or Less Chainsaw

Our Price: $124.99
Part #: HF80002

(6)
Stihl MS280, MS270 cylinder kit 46mm replaces 1133-020-1202 Meteor Stihl MS280, MS270 cylinder kit 46mm replaces 1133-020-1202

Meteor brand Nikasil plated cylinder assembly. Made in Italy.
Highest quality aftermarket kit. This is the closest to OEM you will find.
Fits: Stihl MS280 and MS270 chainsaw. 46mm bore.
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1133 020 1202/3

Our Price: $124.49
Part #: MCC2427
24" Sugihara Light weight guide Bar and Chain Combo for Stihl large mount, 0.375 pitch, .050" gauge 24" Sugihara Light weight guide Bar and Chain Combo for Stihl large mount, 0.375 pitch, .050" gauge

SugiHara brand chainsaw guide bar and chain combo.
Made in Japan. Highest Quality.
Length: 24"
Guage: .050"
Bar type: Light weight
Nose size: 0.375
Teeth count:
Drive links: 84
Bar mount: D025
Fits: Stihl 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 043, 044, 045, 046, 048, 056, 064, 066, 088, MS260, MS261, MS270, MS271, MS280, MS290, MS291, MS310, MS311, MS360, MS361, MS362, MS390, MS391, MS440, MS441, MS460, MS461, MS650, MS660, MS880

Our Price: $169.99
Sale Price: $123.99
Part #: SV3U-0Q62HV-DNS

(4)
Stihl TS480i, TS500i cylinder kit Cross Performance Stihl TS480i, TS500i cylinder kit

Premium quality Nikasil plated cylinder kit by Cross Performance. 52mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl TS480i, TS500i
Replaces OEM part: 4250 020 1200

Our Price: $119.99
Part #: CP30500

(3)
Stihl 066, MS660 cylinder kit 54mm Cross Performance MMWS Stihl 066, MS660 cylinder kit 54mm

Premium quality Nikasil plated MMWS cylinder kit by Cross Performance. 54mm.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl 066, MS650, MS660 chainsaws
Replaces OEM part: 1122 020 1211

Our Price: $119.99
Part #: CP30066

(6)
Stihl 064 cylinder kit 54mm Cross Performance MMWS Stihl 064 big bore cylinder kit 54mm

Premium quality Nikasil plated MMWS cylinder kit by Cross Performance. 54mm Big bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl 064 chainsaws
Replaces OEM part: 1122 020 1203

Our Price: $119.99
Part #: CP30064

(3)