Shop Stihl 017, 018, MS170, MS180 OEM and Aftermarket Parts

Quality aftermarket Oil Seal Puller
Fits: Stihl Most Models
Replaces OEM Part: 5910 890 4400

Hyway brand high quality cylinder kit. 38mm bore.
Fits: Stihl 018*, MS180 chainsaw
Includes: Nikasil plated cylinder and 10mm pin piston kit, oil seals, bearings, spark plug.
Replaces OEM part: 1130 020 1204
*Earlier 018's use a 8mm pin piston. Please verify before ordering.

(2)

Hyway brand cylinder kit. 38mm bore with a 10mm piston pin.
High quality Nikasil plated.
Fits: Stihl 018*, MS180 chainsaw
Replaces OEM part: 1130-020-1204
*Earlier 018's use a 8mm pin piston. Please verify before ordering.

Quality aftermarket overhaul kit. 38mm bore.
Fits: Stihl 018*, MS180 chainsaw
Includes: cylinder and 10mm pin piston kit, oil seals, bearings, spark plug, crankshaft, engine pan.
*Earlier 018's use a 8mm pin piston. Please verify before ordering.

(1)

This is a complete set of Wiha tools for professional chainsaw repairs.
Includes every Wiha tool we use to repair Dolmar, Husqvarna, Jonsered and Stihl chainsaws.
If you are into servicing saws the professional way, you will appreciate this set of these Wiha tools.

(14)

NGK brand spark plug BPMR7A - Shop Pack 25 (1195)
Fits: many models of chainsaw and cut off saws.
Replaces: BOSCH WSR6F, CHAMPION CJ7Y

Quality aftermarket crankshaft kit.
Includes pin bearing, oil seals, bearings and engine pan.
Fits: Stihl 017, MS170, 018 chainsaw.
*Only fits older models with a 8mm piston pin. Later models use an 10mm pin. Please verify before ordering.

Quality aftermarket crankshaft kit.
Includes pin bearing, oil seals, bearings and engine pan.
Fits: Stihl 018*, 019T, MS170, MS180, MS190T, MS191T chainsaw.
*Only fits newer models with a 10mm piston pin. Eariler models of 018 use an 8mm pin. Please verify before ordering.
Replaces OEM part: 1132-030-0401, 1132-030-1402

Quality aftermarket fuel filter.
For Stihl chainsaws and cut off saws.
Replaces OEM part: 0000 350 3500
This will fit a fuel line with an inner diameter of 4.5mm to 5.3mm

Raisman Brand 16" Bar, Chain, and Sprocket Combo
.325" pitch, .063" Gauge
Fits: Stihl 017, 018, 021, 023, 025, MS170, MS180, MS171, MS181, MS210, MS230, MS250.
Replaces OEM part: 1123-007-1032, 9512-933-2260, Oregon: 100961X, GB: ST305SC-J7N

Quality aftermarket crankshaft with pin bearing and engine pan.
Fits: Stihl 017, MS170, 018 chainsaw.
*Only fits older models with a 8mm piston pin. Later models use an 10mm pin. Please verify before ordering.

(2)

Quality aftermarket cylinder and piston kit. 37mm bore.
For Stihl 017*, MS170 chainsaw with a 8mm pin piston.
Includes: cylinder and piston kit, bearings, oil seals, spark plug.
Replaces OEM part: 1130 020 1207

Quality aftermarket cylinder kit. 38mm bore.
Fits: Stihl 018*, MS180 chainsaw
Includes: cylinder and 10mm pin piston kit, oil seals, bearings, spark plug.
Replaces OEM part: 1130 020 1204
*Earlier 018's use a 8mm pin piston. Please verify before ordering.

Raisman Brand 16" Bar, Chain, and Sprocket Combo
3/8" pitch, .050" Gauge
Fits: Stihl 017, 018, 021, 023, 025, MS170, MS180, MS171, MS181, MS210, MS211, MS230, MS250.
Replaces OEM part: 1123-640-2073

(1)

Raisman brand high quality chainsaw bar and chain combo.
Length: 18"
Gauge: .063"
Nose size: .325"
Drive links: 68
Bar mount: A074

(4)

Quality aftermarket crankshaft
Fits: Stihl 017, 018, 019T, MS170, MS180, MS190T, MS191T chainsaw.
*Only fits newer models with a 10mm piston pin. Eariler models of 017 and 018 use an 8mm pin. Please verify before ordering.
Replaces OEM part: 1132-030-0401, 1132-030-1402

(1)

Raisman brand high quality chainsaw bar and chain combo.
Length: 16"
Gauge: .063"
Bar type: Sprocket Nose
Nose size: .325"
Drive links: 62

(3)

Quality aftermarket cylinder kit. 37mm bore.
Fits: Stihl 017*, MS170 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips.
Replaces OEM part: 1130 020 1207
*Fits: 017's after serial number 2 44 076 105 with the later type ignition coil. If you have the earlier type you will also need to change your coil and flywheel.

(7)

Raisman brand high quality chainsaw bar and chain combo.
Length: 16"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: .3/8" lp
Drive links: 55

(2)

Quality aftermarket cylinder kit. 38mm bore.
Fits: Stihl 018*, MS180 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1130 020 1204
*Earlier 018's use a 8mm pin piston. Please verify before ordering.

(7)

Quality aftermarket ignition coil
Fits: Stihl 017, 018, MS170, MS180 chainsaws
Replaces OEM part: 1130 400 1302

(3)

Raisman brand high quality chainsaw guide bar and chain combo.
Length: 16"
Gauge: .050"
Bar type: Sprocket Nose
Nose size: 3/8"
Teeth count: 7 or 9
Drive links: 55
Bar mount: A074
Fits: Stihl 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251
Oleo-Mac 240, 241, 244, 935, OLE 140F, OLE 300

Quality aftermarket carburetor
Fits: Stihl 017, 018, MS170, MS180 chainsaws
Replaces OEM part: 1130 120 0601, Zama C1Q S43B, 1130 120 0600, Walbro WT-325A carburetor

(10)

Oregon brand sprocket.

(1)

Oregon brand sprocket.

(4)

Quality aftermarket kit 38mm.
Fits: Stihl 018, MS180 chainsaw.
Includes: piston, rings, 10mm wrist pin, cir clips
Replaces OEM part: 1130 030 2004

Quality aftermarket piston kit. 37mm. - 8mm. pin
Fits: Stihl 017, MS170 chainsaw
Includes: piston, rings, wrist pin, cir clips
Replaces OEM part: 1130 030 2000

(3)

Quality aftermarket piston kit. 38mm.
Fits: Stihl 018 MS180 chainsaw
Includes: piston, rings, 8 mm. wrist pin, cir clips
Replaces OEM part: 1130 030 2003

(2)

Oregon brand sprocket.

(1)

Oregon brand sprocket.

(3)

Top Saw Pocket Wrench Universal multi-tool with carrying case
Fits: Stihl, Husqvarna, Makita, Wacker, Jonsered, Partner, Poulan, Echo, and more chainsaws and cut off saws

(2)

Quality aftermarket Carburetor
For: Stihl 017, 018, MS170, MS170C, MS180, MS180C
Replaces OEM part(s) #: 1130 120 0603

(19)

Quality aftermarket flywheel.
Fits: Stihl 017, 018, MS170, MS180 chainsaw.
Replaces OEM part: 1130 400 1201

(3)

Quality aftermarket handlebar
Fits: Stihl 017, 018, MS170, MS180 chainsaw
Replaces OEM part: 1130 791 4901

(8)

Quality aftermarket starter recoil assembly.
Fits: Stihl 017, 018, MS170, MS180 chainsaw.
Replaces OEM part: 1130 080 2100

(7)

Raisman brand high quality chainsaw guide bar.
Length: 16"
Gauge: .063"
Bar type: Sprocket Nose
Nose size: .325"
Teeth count: 7
Drive links: 62
Bar mount: A074
Fits: Stihl: 009, 010, 011, 012, 015, 017, 018, 019, 020T, 021, 023, 025, HT100, HT101, HT130, HT131, HT250, HT70, HT73, MS170, MS171, MS180, MS181, MS190T, MS191T, MS192C, MS200T, MS201T, MS210, MS211, MS220, MS230, MS250, MS251