You are here: Home > Overhaul kits
We found 93 results matching your criteria.

Small Engine Rebuild Kits

After about 10 years of use, or less if you use your saw daily for long hours, you may think that it's time to take it to the junkyard; however, most saws can run like new again with an engine overhaul. Save yourself some extra money by selecting a top-end rebuild kit from our great selection, which is significantly cheaper than trying to buy all the parts you need separately from anywhere else.

Our overhaul kits include all the essential new parts you need: Nikasil-plated cylinders, air filter sets, gasket sets, fuel filters, starter handles, fuel lines, spark plugs with new wires and caps, carburetor rebuild kits, bearings, crankshafts, decompression valves, pistons, oil seals, and more. Browse through our selection of small engine rebuild kits to find the best option for your needs.

If you have any questions about our extensive selection of rebuild kits, please don’t hesitate to contact the small engine experts are HLSupply.com! We are always happy to help.

Sort By:
Page of 3
Stihl TS400 Super overhaul kit Husqvarna/Partner K750, K760 overhaul kit with crankshaft Stihl TS400 Nikasil plated overhaul rebuild kit with crankshaft
Our Price: $289.99
Sale Price: $249.99
Part #: H30400S-DNS
List Price: $349.99
Our Price: $229.99
Part #: H30751-DNS
List Price: $374.99
Our Price: $249.99
Sale Price: $209.99
Part #: H30401N-DNS

(2)
Stihl TS400 overhaul kit with crankshaft Husqvarna / Partner K750 overhaul kit Stihl TS400 Nikasil overhaul kit with crankshaft
Quality aftermarket Super overhaul rebuild kit - Best deal!
For Stihl TS400 cut off saws
Add to cart to see all the parts included!
Quality aftermarket cylinder kit
Fits: Partner, Husqvarna K750, K760 cut off saws. Does not fit the newer K760 Active II.
Includes: cylinder kit, air filter combo, spark plug, gasket set, oil seals, decompression valve, fuel filter, belt, OEM bearings, OEM crankshaft
Quality aftermarket overhaul rebuild kit
Fits: Stihl TS400 cut off saws
Includes: High quality Niksail plated cylinder kit, gasket set, air filter set, fuel filter, fuel line, starter handle, spark plug, carburetor rebuild kit, spark plug wire with cap, crankshaft, bearings, decompression valve
Best deal!
Stihl TS410, TS420 overhaul kit with crankshaft Stihl TS400 overhaul rebuild kit with crankshaft Hyway Stihl 044 MS440 big bore cylinder kit 52mm - 12mm pin + overhaul
Our Price: $249.99
Sale Price: $189.99
Part #: H30412-DNS
List Price: $299.99
Our Price: $199.99
Sale Price: $184.99
Part #: H30401-DNS

(2)
List Price: $254.99
Our Price: $182.59
Sale Price: $152.19
Part #: H30440-B-DNS

(4)
Stihl TS410, TS420 overhaul kit Stihl TS400 overhaul kit with crankshaft Stihl chainsaw cylinder kit for Stihl 044 MS440 big bore overhaul kit 52mm
High quality aftermarket cylinder kit
Fits: Stihl TS410, TS420 cut off saws
Replaces OEM part: 4238 020 1202
Includes: Cylinder kit, air filter, spark plug, gasket set, fuel filter, belt, decomp valve, bearings, oil seals, crankshaft
Quality aftermarket overhaul rebuild kit
Fits: Stihl TS400 cut off saws
Includes: cylinder kit, gasket set, air filter set, fuel filter, starter handle, spark plug, carburetor rebuild kit, spark plug wire with cap, crankshaft, bearings, decompression valve Best deal!
Hyway brand Stihl chainsaw cylinder kit
High quality Nikasil plated.
These Stihl chainsaw parts fit 044 MS440 chain saws.
Includes: cylinder kit, dual port muffler, decompression valve, spark plug, gasket set, oil seals
Replaces OEM part: 1128 020 1227 52mm bore *Older 044 chainsaws made before serial number X29 382 283 have a 10mm wrist pin. There are a few rare chainsaws that are after that serial number that also have a 10mm wrist pin. Please verify your pin size before ordering. Includes Free Accessories.
Hyway Stihl 046, MS460 big bore cylinder kit 54mm + overhaul kit Stihl 066, MS650, MS660 big bore + overhaul kit Stihl TS400 Niksail plated overhaul rebuild kit
List Price: $254.99
Our Price: $182.59
Sale Price: $152.19
Part #: H30460-B-DNS

(8)
List Price: $254.99
Our Price: $182.59
Sale Price: $152.19
Part #: H30660-B-DNS

(11)
List Price: $224.99
Our Price: $149.99
Part #: H30400N-DNS
Stihl chainsaw big bore kit for Stihl 046, MS460 overhaul 54mm Stihl chainsaw big bore kit for Stihl 066, MS650, MS660 overhaul Stihl TS400 Nikasil plated overhaul kit
Hyway brand Stihl chainsaw big bore kit. 54mm bore.
High quality Nikasil plated. Has hole for decompression valve.
Fits: Stihl 046 chain saw, and Stihl MS460 chainsaw
Includes: Stihl chainsaw cylinder kit, dual port muffler, decompression valve, spark plug, gasket set, oil seals. Includes Free Accessories.
Big bore kit. 56mm bore.
High quality Nikasil plated.
Fits: Stihl 066, MS650, MS660 chainsaw.
Includes: Stihl chainsaw cylinder kit, dual port muffler, gasket set, oil seals, piston pin bearing, decompression valve, spark plug. Includes Free Accessories!
Replaces OEM part: 1122 020 1211
Quality aftermarket overhaul rebuild kit
Fits: Stihl TS400 cut off saws
Includes:
High quality Niksail plated cylinder kit, pin bearing, gasket set, air filter set, fuel filter, starter handle, spark plug, carburetor rebuild kit, spark plug wire with cap
Best deal!
Cross Performance Stihl TS700, TS800 cylinder kit Rebuild Kit Short Block Kit 49mm for Stihl MS390, MS290 Replaces 1127-020-1216 Cross Performance Husqvarna K760 II (new type) cylinder kit Rebuild Kit
Our Price: $214.99
Sale Price: $148.99
Part #: CP30800-DNS
List Price: $196.99
Our Price: $145.99
Part #: H30398
Our Price: $207.99
Sale Price: $143.99
Part #: CP30761-DNS
Cross Performance Stihl TS700, TS800 cylinder kit Rebuild Kit Short Block Kit 49mm for Stihl MS390, MS290 Replaces 1127-020-1216 Cross Performance Husqvarna K760 II (new type) cylinder kit Rebuild Kit
Premium quality Nikasil plated cylinder kit by Cross Performance. 56mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl TS700, TS800
Replaces OEM part: 4224 020 1202
Comes complete with gaskets, bearing, spark plug
Quality aftermarket Short Block Kit 49mm
Fits: Stihl MS390, MS290
Replaces OEM part(s) #: 1127 020 1216, 1127 030 0402
Premium quality Nikasil plated cylinder kit by Cross Performance. 51mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Husqvarna K760 Active II only. Does not fit the K760. See picture for confirmation.
Replaces OEM part: 581 47 61-01
Comes complete with gaskets, bearing, spark plug, air filter

Cross Performance Husqvarna K750 cylinder kit Rebuild Kit Cross Performance Stihl TS410, TS420 cylinder kit Rebuild Kit Hyway Stihl TS700, TS800 Nikasil plated cylinder kit Rebuild Kit
Our Price: $194.99
Sale Price: $135.99
Part #: CP30750-DNS
Our Price: $188.99
Sale Price: $130.99
Part #: CP30410-DNS

(2)
Our Price: $153.69
Sale Price: $128.09
Part #: H30700-DNS
Cross Performance Husqvarna K750 cylinder kit Rebuild Kit Cross Performance Stihl TS410, TS420 cylinder kit Rebuild Kit Hyway Stihl TS700, TS800 Nikasil plated cylinder kit Rebuild Kit
Premium quality Nikasil plated cylinder kit by Cross Performance. 51mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Husqvarna K750
Replaces OEM part: 506 38 61-71, 520 75 73-02
Comes complete with gaskets, bearing, spark plug, air filter
Premium quality Nikasil plated cylinder kit by Cross Performance. 50mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl TS410, TS420
Replaces OEM part: 4238 020 1202
Comes complete with gaskets, bearing, spark plug, air filter
Hyway brand cylinder kit. 56mm bore.
High quality Nikasil plated.
These Stihl cutoff saw parts fit TS700, TS800 cut off saws.
Replaces OEM part: 4224 020 1202
Includes: cylinder, piston, rings, wrist pin, circlips.
Comes complete with gaskets, bearing, spark plug
Stihl 039, MS390 Nikasil plated cylinder kit 49mm + overhaul kit Hyway Husqvarna/Partner K750, K760 Nikasil plated cylinder kit Rebuild Kit Hyway Stihl 028 top end overhaul kit 46mm
List Price: $209.99
Our Price: $151.19
Sale Price: $125.99
Part #: H30390-N-DNS

(4)
Our Price: $147.29
Sale Price: $122.79
Part #: H30750-N-DNS
List Price: $194.99
Our Price: $144.79
Sale Price: $120.69
Part #: H30028-DNS

(13)
Stihl 039, MS390 top end overhaul kit 49mm Hyway Husqvarna/Partner K750, K760 Nikasil plated cylinder kit Rebuild Kit Hyway Stihl 028 top end overhaul kit
High quality Nikasil plated aftermarket top end overhaul kit. 49mm bore
Fits: Stihl 039, MS390 chainsaw Works as a big bore for 029, MS290, MS310
Includes: cylinder, piston, rings, wrist pin, cir clips, main bearings, wrist pin bearing, oil seals, spark plug Has hole for decompression valve
Replaces OEM part: 1127 020 1216
Hyway brand cylinder kit
High quality Nikasil plated.
Fits: Partner, Husqvarna K750, K760 cut off saws. Does not fit the newer K760 Active II.
Replaces OEM part: 506 38 61-71, 520 75 73-02
Includes: cylinder, piston, rings, wrist pin, circlips, cylinder gasket, needle bearing
Comes complete with gaskets, bearing, spark plug, air filter
Hyway brand Nikasil plated cylinder kit. 46mm bore
Fits: Stihl 028, AV, Super chainsaw.
Includes: cylinder, piston, rings, wrist pin, cir clips, spark plug, pin bearing, fuel filter, cylinder and exhaust gaskets.
Replaces OEM part: 1118 020 1203
Hyway Stihl 036, MS360 top end overhaul kit 48mm Cross Performance Partner K650, K700 cylinder kit Rebuild Kit Stihl 029, MS290 short-block rebuild kit 46mm
List Price: $176.99
Our Price: $138.59
Sale Price: $115.49
Part #: H30036-DNS

(5)
Our Price: $165.99
Sale Price: $114.99
Part #: CP30650-DNS

(1)
List Price: $194.99
Our Price: $149.99
Sale Price: $114.99
Part #: H30291-DNS

(6)
Stihl Chainsaw top end rebuild kit for Stihl 036, MS360 chain saw rebuilds Cross Performance Partner K650, K700 cylinder kit Rebuild Kit Stihl 029, MS290 overhaul kit with crankshaft
Hyway brand Nikasil plated top end rebuild kit. 48mm bore.
Fits: Stihl 036, MS360 chainsaw.
Includes: cylinder kit, pin bearing, fuel filter, gaskets, spark plug
Replaces OEM part: 1125 020 1215, 1125 020 1213
Premium quality Nikasil plated cylinder kit by Cross Performance. 50mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Partner K650, K700
Replaces OEM part: 537 15 73-02
Comes complete with gaskets, bearing, spark plug
Qulity aftermarket overhaul kit. 46mm bore.
Fits: Stihl 029, MS290 chainsaw.
Includes: cylinder kit, main bearings, wrist pin bearing, oil seals, spark plug, crankshaft, engine pan.
Hyway Husqvarna/Partner K950 Nikasil plated cylinder kit Rebuild Kit Hyway Stihl TS400 Top end overhaul kit Hyway Stihl 026, MS260 top end overhaul kit 44.7mm
Our Price: $132.19
Sale Price: $110.19
Part #: H30950-N-DNS
List Price: $209.99
Our Price: $132.19
Sale Price: $110.19
Part #: H30402-DNS

(2)
List Price: $164.99
Our Price: $132.19
Sale Price: $110.19
Part #: H30260-DNS

(3)
Hyway Husqvarna/Partner K950 Nikasil plated cylinder kit Rebuild Kit Hyway Stihl TS400 Top end overhaul kit Hyway Stihl MS260 top end overhaul kit
Hyway brand high quality Nikasil plated kit
Fits: Partner, Husqvarna K950 cut off saws
Replaces OEM part: 506 15 55-06
Includes: cylinder, piston, rings, wrist pin, circlips, pin bearing
Comes complete with gaskets, bearing, spark plug
Hyway brand Nikasil plated Stihl cut off saw top end rebuild kit. Includes Free Parts!
Fits: Stihl TS400 concrete cut off saws
Includes: Stihl cutoff saw cylinder, pin bearing, fuel filter, gaskets, spark plug
Replaces OEM part: 4223 020 1200 49mm bore
Hyway brand Nikasil plated cylinder kit. 44.7mm bore.
Fits: Stihl 026 (big bore), MS260 chainsaw. Works on models with or without decompression valve.
Includes: cylinder, piston, rings, wrist pin, cir clips, decompression valve plug, threaded studs, spark plug, pin bearing, fuel filter, cylinder and exhaust gaskets.
Replaces OEM part: 1121 020 1203, 1121 020 1208
Husqvarna K760 cylinder overhaul kit Hyway Husqvarna 395, 395XP Nikasil plated cylinder kit Rebuild Kit Cross Performance Stihl 038, AV, Super cylinder kit Rebuild Kit
Our Price: $149.99
Sale Price: $109.99
Part #: H30760-DNS

(3)
Our Price: $125.99
Sale Price: $104.99
Part #: H30395-DNS
Our Price: $149.99
Sale Price: $103.99
Part #: CP30038-DNS
Husqvarna / Partner K760 overhaul kit Hyway Husqvarna 395, 395XP Nikasil plated cylinder kit Rebuild Kit Cross Performance Stihl 038, AV, Super cylinder kit Rebuild Kit
Quality aftermarket cylinder kit
Fits: Husqvarna K760 cut off saws. Does not fit the newer K760 Active II.
Replaces OEM part: 506 38 61-71, 520 75 73-02
Includes: cylinder assembly, air filter combo, spark plug, gasket set, oil seals, decompression valve, fuel filter, pin bearing
Hyway brand cylinder kit. 56mm bore.
High quality Nikasil plated.
Fits: Husqvarna 395, 395XP chainsaw.
May be used on 394 but you would need to convert it. Our product code H40394.
Replaces OEM part: 503 99 39-71, 503 99 39-03
Comes complete with gaskets, bearing, spark plug
Premium quality Nikasil plated cylinder kit by Cross Performance. 50mm bore.
Includes high quality CABER (Italy) brand piston rings.
Fits: Stihl 038, AV, Super (does not fit Magnum)
Replaces OEM part: 1119 020 1201
Comes complete with gaskets, bearing, spark plug, air filter
Hyway Husqvarna 55, 51 cylinder kit 46mm - Closed port Rebuild Kit Husqvarna 261, 262, 262XP top end overhaul kit 48mm Stihl TS410, TS420 overhaul kit
Our Price: $123.49
Sale Price: $102.89
Part #: H30055-W-DNS
List Price: $149.99
Our Price: $99.99
Part #: H30262-DNS

(9)
Our Price: $149.99
Sale Price: $99.99
Part #: H30411-DNS
Hyway Husqvarna 55, 51 cylinder kit 46mm - Closed port Rebuild Kit Husqvarna 261, 262, 262XP top end overhaul kit 48mm Stihl TS410, TS420 overhaul kit
Hyway brand cylinder kit. 46mm bore.
High quality Nikasil plated.
Fits: Husqvarna 51 & 55 Rancher chainsaws
Will work as an oversize kit. for the 51 chainsaw
Closed port version with windowed piston.
Replaces OEM part: 503 16 91-71 or 503 16 91-72
Comes complete with gaskets, bearing, spark plug, air filter
Aftermarket top end rebuild kit. 48mm bore.
Fits: Husqvarna 261, 262, 262XP chainsaws
Includes: cylinder, piston, rings, wrist pin, cir clips, upper gasket set, wrist pin bearing, decompression valve, spark plug
Replaces OEM part: 503 90 79-71
High quality aftermarket cylinder kit
Fits: Stihl TS410, TS420 cut off saws
Replaces OEM part: 4238 020 1202
Includes: Cylinder kit, air filter, spark plug, wrist pin bearing, gasket set, fuel filter, belt
Stihl 066, MS650, MS660 cylinder overhaul kit Husqvarna 346 XP cylinder kit, gaskets, bearing kit 44.3mm Stihl 039, MS390 cylinder kit 49mm + overhaul kit
List Price: $149.99
Our Price: $99.99
Part #: R60566-DNS

(3)
List Price: $164.99
Our Price: $109.99
Sale Price: $99.99
Part #: H30346-DNS

(2)
List Price: $179.99
Our Price: $119.99
Sale Price: $99.99
Part #: H30390-DNS

(7)
Stihl 066 MS660 cylinder piston assembly 54mm Husqvarna 346 XP cylinder and piston assembly Stihl 039, MS390 top end overhaul kit 49mm
Quality aftermarket overhaul kit. 54mm bore.
Fits: Stihl 066, MS650, MS660 chainsaw
Includes: cylinder, piston kit, spark plug with wire with cap, fuel filter, gasket set, seals, starter handle with rope, pin bearing, decompression valve, HD air filter
Replaces OEM part: 1122 020 1211
Quality aftermarket cylinder kit. 44.3mm bore.
Fits: Husqvarna 346 XP chainsaw Also fits 350, 351, 353 Closed port cylinder
Includes: cylinder, piston, ring, wrist pin, cir clips, spark plug, exhaust and base gasket, pin bearing
Aftermarket top end overhaul kit. 49mm bore.
Fits: Stihl 039, MS390 chainsaw
Works as a big bore for 029, MS290, MS310
Includes: cylinder, piston, rings, wrist pin, cir clips, main bearings, wrist pin bearing, oil seals, spark plug
Replaces OEM part: 1127 020 1216
Hyway Stihl TS410, TS420 Nikasil plated cylinder kit Rebuild Kit Hyway Husqvarna 181, 281, 288 Nikasil plated cylinder kit 54mm Rebuild Kit Hyway Stihl 038 Magnum, MS380 cylinder kit 52mm Rebuild Kit
Our Price: $118.39
Sale Price: $98.69
Part #: H30410-N-DNS
Our Price: $118.39
Sale Price: $98.69
Part #: H30288-N-DNS
Our Price: $113.39
Sale Price: $94.49
Part #: H30380-N-DNS
Hyway Stihl TS410, TS420 Nikasil plated cylinder kit Rebuild Kit Hyway Husqvarna 181, 281, 288 Nikasil plated cylinder kit 54mm Rebuild Kit Hyway Stihl 038 Magnum, MS380 cylinder kit 52mm Rebuild Kit
Hyway brand cylinder kit.
High quality Nikasil plated
Fits: Stihl TS410, TS420 cut off saws
Replaces OEM part: 4238-020-1202
Comes complete with gaskets, bearing, spark plug, air filter
Hyway brand cylinder kit. 54mm bore.
High quality Nikasil plated.
Fits: Husqvarna 181, 281, 288xp chainsaws.
Replaces OEM part: 503 90 74-71
Comes complete with gaskets, bearing, spark plug
Hyway brand cylinder kit. 52mm bore.
High quality Nikasil plated.
Fits: Stihl 038 Magnum, MS380
Will not bolt on to the 50mm 038
Replaces OEM part: 1119 020 1202
Comes complete with gaskets, bearing, spark plug, air filter