Shop Husqvarna 385 OEM and Aftermarket Parts

Genuine Husqvarna 55 mm cylinder assembly #544006502/597868702 for 385 XP, 390 XP, Jonsered CS2186/CS2188. Includes piston, rings, bearing, decomp plug.

(5)

Genuine Husqvarna 54 mm cylinder assembly #537169771 for 385 XP, 385, Jonsered CS2186/CS2188. Complete with piston, rings, bearing & decomp plug.

Genuine Husqvarna Flywheel
Part #: 537 05 16-06
Fits 362 XP SPECIAL EPA, 362 XP SPECIAL, 372XP/XPG X-TORQ, 372XP/XPG, 385 EPA, 385 XP EPA, 385 XP, 385

Genuine Husqvarna Generator (G Models)
Part #: 537 07 18-02
Fits 362 XP SPECIAL EPA, 362 XP SPECIAL, 372XP/XPG X-TORQ, 372XP/XPG, 385 EPA, 385 XP EPA, 385 XP, 385

Genuine Husqvarna Puller/Engine Block
Part #: 502 51 61-01
Fits 51, 55, 254, 257, 261, 262, 61, 265

(3)

Quality aftermarket Chainsaw Mill
For 36" Or Less Chainsaw

(13)

Genuine Husqvarna Thermostat (G Models)
Part #: 537 18 98-01
Fits 372XP/XPG X-TORQ, 372XP/XPG, 385 EPA, 385 XP EPA, 385 XP, 385, 390XP/XPG/XPW, 395 XP EPA

Genuine Husqvarna Clutch Cover Assy (Full Wrap Models)
Part #: 537 33 10-01
Fits 365 H, 372XP/XPG X-TORQ, 385 EPA, 385 XP EPA, 385 XP, 385, 390XP/XPG/XPW, 570 EPA

(1)

Genuine Husqvarna Oil Pump. Part # 503521305. Fits Husqvarna 385XP, 390XP, Jonsered CS2188, and Redmax G9000. Factory-original lubrication solution.

(1)

Genuine Husqvarna Starter Assy
Part #: 537 00 38-71
Fits 385 EPA, 385 XP EPA, 385 XP, 385, 390XP/XPG/XPW

Genuine Husqvarna Assembly Tool
Part #: 502 50 30-15
Fits 365, 371, 372, 385

(13)

Wiha 8-piece T-handle chainsaw repair tool set – hex, nut drivers & Torx. Professional German quality for Stihl/Husqvarna service.

(26)

Genuine Husqvarna Clutch
Part #: 503701502
Fits 281 XP, 281, 288 EPA, 288 XP, 288, 385 EPA, 385 XP, 385

(1)

Genuine Husqvarna Flywheel
Part #: 537 05 16-05
Fits 362 XP SPECIAL EPA, 362 XP SPECIAL, 362, 365 H, 365 SPECIAL EPA, 365 SPECIAL, 365 X-TORQ, 365SP

Genuine Husqvarna Clutch Drum Assy
Part #: 537 13 79-71
Fits 385 EPA, 385 XP EPA, 385 XP, 385, 390 EPA, 390, 390XP, CS2186

Quality aftermarket crankshaft
Fits: Husqvarna 385, 390 chainsaws
Replaces OEM part: 503 99 34-04

(5)

Restore smooth chain adjustments with the Genuine Husqvarna 537044102 Chain Tensioner Kit. This complete OEM side-access rebuild kit includes the worm gear, screw, pawl, and cover. Specifically designed for professional Husqvarna 362, 365, 372 XP, 385 XP, 390 XP, and 576 XP series chainsaws.

(2)

High quality Italian made piston kit by Meteor.

(3)

Genuine Husqvarna Air Filter - Felt
Part #: 537 00 93-01
Fits 385, 385 XP, 385 XP EPA, 390, 390 EPA, 390XP, 385 EPA

(1)

Genuine Husqvarna Decompression Valve
Part #: 503 71 53-01
Fits K750, K760, 365, 365 SPECIAL, 281, 272K, 385 XP, 371 XP

(17)

Hyway brand high quality muffler.
Fits: Husqvarna 362, 365, 371, 372, 385, 390 chainsaw.
Exhaust port on top. With spark arrestor screen.
Replaces OEM part: 503 76 53-02, OLD 503 76 53-01

(10)

NGK BPMR7A (4626) Resistor Spark Plug – Box of 10. OEM for Stihl MS261–MS661, Husqvarna 346XP–572XP, Echo & more.

(6)

Genuine Husqvarna Extractor
Part #: 502 50 55-01
Fits 362, 365, 371, 372, 385, 340, 345, 350

(5)

Genuine Husqvarna Chip Guard
Part #: 537 17 41-01
Fits 365 H, 372XP/XPG X-TORQ, 385 EPA, 385 XP EPA, 385 XP, 385, 390XP/XPG/XPW, 570 EPA

Quality fuel filter/pick up body
Fits: Husqvarna chainsaws and cut off saws
Replaces OEM part: 503 44 32-01
This will fit a fuel line with an inner diameter of 3.5mm to 4mm
20 pack

(6)

Restore safety and control to your chainsaw with the Genuine Husqvarna 537016901 Hand Guard. This OEM chain brake lever is the factory replacement for Husqvarna 385 XP and 390 XP professional saws. Built for high-impact resistance and precise brake activation.

(1)

Genuine Husqvarna Vibration Absorber
Part #: 537 01 75-02
Fits 385 EPA, 385 XP, 385, 390 EPA, 390, 390XP

Genuine Husqvarna Support Bushing
Part #: 503 25 61-01
Fits 288 XP, 385 XP, K960, 390 EPA, 385 XP EPA, 288 EPA, 390XP, 390

Non-Genuine Clutch Cover with Chip Guard & Tensioner for Husqvarna 362, 365, 371, 372XP, 385XP, 390XP.

(14)