Shop Husqvarna 36 OEM and Aftermarket Parts

Solid body guide bar for the professional woodcutter.

This is a complete set of Wiha tools for professional chainsaw repairs.

(19)

OEM Husqvarna, Poulan fuel filter/pick up body
Fits: smaller chainsaws, trimmers, cut off saws
Part: 530 09 56-46
This will fit a fuel line with an inner diameter of 3mm to 3.5mm
20 pack

NGK brand spark plug BPMR7A - Shop Pack 25 (1195)
Fits: many models of chainsaw and cut off saws.
Replaces: BOSCH WSR6F, CHAMPION CJ7Y

(2)

Quality fuel filter/pick up body
Fits: Husqvarna chainsaws and cut off saws
Replaces OEM part: 503 44 32-01
This will fit a fuel line with an inner diameter of 3.5mm to 4mm
20 pack

(1)

This 16" guide bar and chain combination features a 3/8" low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain.

(1)

Genuine Husqvarna Puller Worm Gear
Part #: 530 03 11-36
Fits 136, 141, 36, 41

Quality aftermarket cylinder kit. 40mm bore.
Fits: Husqvarna 136, 137, 141, 142 chainsaw.
Includes: cylinder, piston, rings, wrist pin, cir clips
Comes complete with bearing, spark plug, air filter

(2)

Raisman Brand 14" Bar, Chain, and Sprocket Combo
3/8" pitch, .050" Gauge

Raisman Brand 16" Bar, Chain, and Sprocket Combo
.325" pitch, .050" Gauge

Quality aftermarket cylinder kit. 40mm bore.
Fits: Husqvarna 136, 137, 141, 142 chainsaw.
Includes: cylinder, piston, rings, wrist pin, cir clips

(7)

Raisman brand high quality chainsaw guide bar and chain combo.
Length: 14"

Genuine Husqvarna Chainsaw Tune-Up Kit
Part #: 599 33 30-01
Fits 136 LE, 136, 137 (EXPORT), 137 (NORTH AMERICA), 137 E, 137, 141 LE, 141

Genuine Husqvarna Muffler Kit
Part #: 530 06 94-15
Fits 137, 142, 141, 136, 142 (EXPORT), 137 (EXPORT)

(1)

*CLEARANCE ITEM - Sold as/is - NO Returns
Discontinued product

*CLEARANCE ITEM - Sold as/is - NO Returns
Discontinued product

Quality aftermarket ignition coil
Fits: Husqvarna 36, 41, 136, 137, 141, 142 chainsaws
Replaces OEM part: 530 03 91-43

(10)

Raisman brand high quality chainsaw guide bar.
Length: 16"

(1)

Eliminates, Prevents Ethanol Fuel Problems
Ethanol, E10 fuels increase the amounts of water and sludge in your fuel tank. Star Tron breaks down this excess water and sludge to sub-micron size allowing it to be safely burned away during normal engine operation. Therefore Star Tron prevents phase separation and fuel gelling, eliminating ethanol fuel problems.

8 oz. Small Engine Star Tron formula treats 48 gallons of fuel

(6)

Raisman brand high quality chainsaw guide bar.
Length: 18"

(2)

Genuine Husqvarna Antivibe Element
Part #: 501628701
Fits 242, 246, 268, 268K, 272 XP, 36, 42, 625

Quality aftermarket sprocket rim, drum, bearing
7 tooth for a 3/8" pitch chain.
Fits: Husqvarna 36, 37, 41, 42, 136, 137, 141, 142
Please note: Some saws use .325" sprocket. This only work with 3/8" bar and chain. Please verify before ordering.

(4)

Quality aftermarket sprocket rim, drum, bearing
7 tooth for a .325" pitch chain.
Fits: Husqvarna 36, 37, 41, 42, 136, 137, 141, 142, Jonsered 2035, 2036, 2040, 2041
Replaces OEM part: 530 06 93-16
*Please note: Some saws use 3/8" sprocket. This only work with .325" bar and chain. Please verify before ordering.

(2)

Raisman brand high quality chainsaw guide bar.
Length: 14"

Genuine Husqvarna U-Spanner
Part #: 502 51 00-02
Fits 136, 141, 36, 41

Genuine Husqvarna Starter Recoil Spring
Part #: 501 76 31-01
Fits 136, 141, 240 EPA, 240 F, 240 R EPA, 240 R, 240, 245 EPA

Genuine Husqvarna Flywheel Knocker-Fine Thread
Part #: 502 51 94-01
Fits 136, 141, 36, 41

Genuine Husqvarna Flywheel
Part #: 575 63 55-02
Fits 120 MARK II, 136 LE, 136, 141 LE, 141, 230, 235 E, 235

This tool is required to remove the clutch from certain model saws.
You will need this tool to replace your clutch and drive sprocket.
Each tool has a 19mm nut fitting so you can easily adapt a socket or bar wrench to torque.
Clutches are reverse threaded, so be sure to turn the proper direction. A piston stop will help.

Fits: Husqvarna 36, 37, 136, 137, 141, 142

(7)

Genuine Husqvarna Piston Stopper
Part #: 502 50 33-01
Fits 3120, 36, 41

Genuine Husqvarna Intake Pipe
Part #: 530 02 98-14
Fits: 36, 41, 51, 55, 141, 142, 136, 137

(2)

Quality aftermarket clutch assembly
Fits: Husqvarna 136, 137, 141, 142 chainsaws
Replaces OEM part: number 530 01 49-49

(2)

Quality aftermarket kit. 38mm bore
Fits: Husqvarna 136, 137, 141, 142 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips

(1)

Genuine Husqvarna Chainsaw Eyelet
Part #: 596 27 17-01
Fits All model chainsaws

Genuine Husqvarna Oil Cap
Part #: 501765602
Fits 136 LE, 136, 137 (EXPORT), 137, 141 LE, 142 (NORTH AMERICA), 142 E, 142

(1)

Lucas High Performance Semi-Sythetic 2 CYCLE Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines.

(1)