Genuine OEM Ignition Coil
OEM part number: 038-143-042
Fits models: DCS642120, DCS6401

(1)

Quality Aftermarket Big Bore Kit for Dolmar PS 7900, Makita DCS 6421. 54mm bore, includes cylinder, piston.

(17)

Wiha 8-piece T-handle chainsaw repair tool set – hex, nut drivers & Torx. Professional German quality for Stihl/Husqvarna service.

(26)

Genuine OEM Oil Pump Complete
OEM part number: 038-245-011
Fits models: DCS6401-20, DCS6401, DCS7301, DCS7901, DCS642120

(4)

Genuine OEM Oil Line Complete
OEM part number: 038-245-020
Fits models: DCS6401-20, DCS6401, DCS7301, DCS7901, DCS642120

(4)

Genuine OEM Intake Manifold
OEM part number: 038-131-011
Fits models: DCS6401, DCS6421, DCS7301, DCS7901, PS-7910

(4)

Genuine OEM Clutch
OEM part number: 038-180-013, 038-180-014
Fits models: DCS6401, DCS6421, PS-6400, EA7300PR, PS-7310, EA7301PR, PS-7310H, EA7900PR, DCS7901, PS-7910, EA7901PR, PS-7910H

Genuine OEM Decompression Valve
OEM part number: 038-118-180
Fits models: DCS6401, DCS6421, EA7300PR, PS-7310, EA7301PR, PS-7310H, EA7900PR, EA7901PR, PS-7910, PS-7910H

Genuine OEM Decompression Valve
OEM part number: 001-131-150
Fits models: DPC6410, DPC7310, DPC7311, DPC8112, DPC6411, DCS6401, DCS7301, DCS7901, DPC6401

Non-genuine 10-pack T-Wrenches for Stihl, Husqvarna. Torx 27, 19mm/13mm. Fits many models.

Genuine OEM Air Filter Nylon
OEM part number: 038-173-011
Fits models: DCS6401-20, DCS6401, DCS7301, DCS7901, DCS642120

(3)

Genuine OEM Needle Cage Bearing
OEM part number: 962-210-121
Fits models: DPC6410, DPC7310, DPC7311, DPC8112, DPC6411, DCS6401-20, DCS6800I, DCS6401, DCS7301, DCS7901, DPC6401

(2)

Genuine OEM Crankcase Bearing
Fits models: DPC6410, DPC7310, DPC7311, DPC8112, DPC6411, DCS6401-20, DCS6800I, DCS6401, DCS7301, DCS7901, DPC6401

Torch L7RTC Spark Plug 10-Pack for Stihl, Husqvarna, Poulan, Echo. Replaces NGK BPMR7A, Champion CJ7Y, Bosch WSR6F. Fits chainsaws, trimmers, blowers.

(1)

Genuine OEM Oil Seal
OEM part number: 962-900-052
Fits models: DPC6410, DPC7310, DPC7311, DPC8112, DPC6411, DCS6401-20, DCS6800I, DCS6401, DCS7301, DCS7901, DPC6401

(3)

Genuine OEM Chip Guide
OEM part number: 038-213-190
Fits models: DCS6401-20, DCS6401, DCS7301, DCS7901, DCS642120

Genuine OEM Fuel/Oil Cap
OEM part number: 010-114-050
Fits models: DCS341, DCS400, DCS401, DCS6401, DCS7301

(1)

Genuine OEM Plate
OEM part number: 038-213-040
Fits models: DCS6401-20, DCS6401, DCS7301, DCS7901, DCS642120

Genuine OEM Fuel Filter
OEM part number: 010-114-010
Fits models: DPC6410, DPC7310, DPC7311, DPC8112, DPC6411, DCS6401-20, DCS6800I, DCS6401, DCS7301, DCS7901, DPC6401, DPC7301

Genuine OEM Guide Plate
OEM part number: 038-111-030
Fits models: DCS6401-20, DCS6401, DCS7301, DCS7901, DCS642120

(1)

Genuine OEM Rubber Foot
OEM part number: 394-114-070
Fits models: DPC6410, DPC7310, DPC7311, DPC8112, DPC6411, DPC6401, DPC7301, DPC6400, DPC6200, DPC6201, DPC7321

Genuine Cylinder Gasket

Makita Tension Spring Ek7301
Part #: 232352-3

(1)

Genuine OEM Chain Guide
OEM part number: 024-213-240
Fits models: DCS6401-20, DCS6401, DCS7301, DCS9010, DCS642120

Non-Genuine Needle Cage Bearing for Stihl 08, 038, MS380, MS381, TS350, TS460, Partner K650, K700, Makita 63XX, 73XX. Replaces OEM 9512-003-3140, 962-210-121.

(15)

Bosch brand spark plug WSR6F
Fits: many models of chainsaw and cut off saws.
Replaces: NGK BPM7A, CHAMPION CJ7Y
*Buy 10 or more and receive a 10% discount!

(122)

T-Wrench Flathead x 19mm x 13mm (3/4" x 1/2") fits most chainsaws: Stihl, Husqvarna, Echo, Poulan, Makita. Durable steel, corrosion-resistant.

(85)

Non-genuine T-Wrench for Stihl, Husqvarna. Torx 27, 19mm/13mm sockets. Fits many models. 10-packs for savings.

(59)

Torch L7RTC Spark Plug for Stihl, Husqvarna, Poulan, Echo. Replaces NGK BPMR7A, Champion CJ7Y, Bosch WSR6F. Fits chainsaws, trimmers, blowers. Durable.

(45)