Hyway Chainsaw Parts

Big bore kit. 56mm bore.
High quality Nikasil plated.
Fits: Stihl 066, MS650, MS660 chainsaw.
Includes: Stihl chainsaw cylinder kit, dual port muffler, gasket set, oil seals, piston pin bearing, decompression valve, spark plug. Includes Free Accessories!
Replaces OEM part: 1122 020 1211

(12)

Hyway brand Stihl chainsaw cylinder kit
High quality Nikasil plated.
These Stihl chainsaw parts fit 044 MS440 chain saws.
Includes: cylinder kit, dual port muffler, decompression valve, spark plug, gasket set, oil seals
Replaces OEM part: 1128 020 1227 52mm bore *Older 044 chainsaws made before serial number X29 382 283 have a 10mm wrist pin. There are a few rare chainsaws that are after that serial number that also have a 10mm wrist pin. Please verify your pin size before ordering. Includes Free Accessories.

(4)

Hyway brand Stihl chainsaw big bore kit. 54mm bore.
High quality Nikasil plated. Has hole for decompression valve.
Fits: Stihl 046 chain saw, and Stihl MS460 chainsaw
Includes: Stihl chainsaw cylinder kit, dual port muffler, decompression valve, spark plug, gasket set, oil seals. Includes Free Accessories.

(11)

Hyway brand cylinder kit. 56mm bore.
High quality Nikasil plated.
These Stihl cutoff saw parts fit TS700, TS800 cut off saws.
Replaces OEM part: 4224 020 1202
Includes: cylinder, piston, rings, wrist pin, circlips.
Comes complete with gaskets, bearing, spark plug

(3)

Hyway brand cylinder kit
High quality Nikasil plated.
Fits: Partner, Husqvarna K750, K760 cut off saws. Does not fit the newer K760 Active II.
Replaces OEM part: 506 38 61-71, 520 75 73-02
Includes: cylinder, piston, rings, wrist pin, circlips, cylinder gasket, needle bearing
Comes complete with gaskets, bearing, spark plug, air filter

(1)

Hyway brand high quality Nikasil Plated Cylinder Kit
Fits: Stihl MS391

(2)

Hyway brand cylinder kit.
High quality Nikasil plated
Fits: Stihl TS410, TS420 cut off saws
Replaces OEM part: 4238-020-1202
Comes complete with gaskets, bearing, spark plug, air filter

(1)

Hyway brand cylinder kit. 52mm bore.
High quality Nikasil plated.
Fits: Husqvarna 272, 272XP chainsaws, 272K cut off saws
This also can fit 61, 268 for increased displacement.
Replaces OEM part: 503 60 96-71
Comes complete with gaskets, bearing, spark plug, air filter

(2)

Hyway brand Nikasil plated top end rebuild kit. 44.7mm bore.
Fits Stihl MS261 chainsaw
Includes: cylinder kit, pin bearing, fuel filter, gaskets, spark plug

(4)

Hyway brand high quality Nikasil plated kit
Fits: Partner, Husqvarna K950 cut off saws
Replaces OEM part: 506 15 55-06
Includes: cylinder, piston, rings, wrist pin, circlips, pin bearing
Comes complete with gaskets, bearing, spark plug

(1)

Hyway brand cylinder kit. 50mm bore.
High quality Nikasil plated.
Fits: Husqvarna 371, 372 chainsaws. Also will fit 362 and 365 as a big bore.
Includes: cylinder, piston, rings, wrist pin, cir clips
Comes complete with gaskets, bearing, spark plug

*This does NOT fit X-TORQ saw models.

Hyway brand cylinder kit. 46mm bore.
High quality Nikasil plated.
Fits: Husqvarna 51 & 55 Rancher chainsaws
Will work as an oversize kit. for the 51 chainsaw
Closed port version with windowed piston.
Replaces OEM part: 503 16 91-71 or 503 16 91-72
Comes complete with gaskets, bearing, spark plug, air filter

(1)

Hyway brand cylinder kit. 40mm bore.
High quality Nikasil plated.
Fits: Husqvarna 340 chainsaw.
Includes: cylinder, piston, rings, wrist pin, cir clips.
Replaces OEM part: 503 87 00-73
Comes complete with gaskets, bearing, spark plug, air filter

Hyway brand cylinder kit. 45mm bore.
High quality Nikasil plated Closed port. This is the best cylinder available for these saws.
Fits: Husqvarna 350, 351, 353 chainsaw. Also works as a big bore for 346xp.
Includes: cylinder, piston, ring, wrist pin, cir clips
Replaces OEM part: 537 25 31-02
Comes complete with gaskets, bearing, spark plug, air filter

(14)

Hyway brand cylinder kit. 56mm bore.
High quality Nikasil plated
Fits: Stihl MS661 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1144 020 1200

(2)

Hyway brand cylinder kit. 44.7mm bore.
High quality Nikasil plated
Fits: Stihl MS261 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1141 020 1200

(3)

Hyway brand cylinder kit. 54mm bore.
High quality Nikasil plated.
Fits: Husqvarna 181, 281, 288xp chainsaws.
Replaces OEM part: 503 90 74-71
Comes complete with gaskets, bearing, spark plug

(1)

Hyway brand cylinder kit. 47mm bore.
High quality Nikasil plated.
These Stihl chainsaw parts fit MS362 chainsaws
Includes: Stihl chainsaw cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1140 020 1205

(6)

Hyway brand cylinder kit. 55mm bore.
High quality Nikasil plated.
Fits: Husqvarna 390 chainsaws. Will also fit 385 as a big bore
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 544 00 65-02
Comes complete with gaskets, bearing, spark plug

(1)

Hyway brand cylinder kit. 52mm bore.
High quality Nikasil plated.
Fits: Stihl 038 Magnum, MS380
Will not bolt on to the 50mm 038
Replaces OEM part: 1119 020 1202
Comes complete with gaskets, bearing, spark plug, air filter

(1)

Hyway brand cylinder kit. 60mm bore.
High quality Nikasil plated.
Husqvarna 3120, 3120XP, 3120K, Partner K1250
Includes: piston, rings, wrist pin, cir clips
Replaces OEM part: 506 29 42-71

(2)

Hyway brand cylinder kit. 56mm bore.
High quality Nikasil plated.
These Stihl cutoff saw parts fit TS700, TS800 cut off saws.
Replaces OEM part: 4224 020 1202
Includes: cylinder, piston, rings, wrist pin, circlips.

(2)

Hyway brand cylinder kit. 50mm bore.
High quality Nikasil plated.
Fits: Husqvarna 268 chainsaws, 268K cut off saws
This also can fit 61 for increased displacement.
Replaces OEM part: 503 61 10-71
Comes complete with gaskets, bearing, spark plug

Hyway brand cylinder kit
High quality Nikasil plated.
Fits: Partner, Husqvarna K750, K760 cut off saws. Does not fit the newer K760 Active II.
Replaces OEM part: 506 38 61-71, 520 75 73-02
Includes: cylinder, piston, rings, wrist pin, circlips

(3)

Hyway brand cylinder kit. 48mm bore.
High quality Nikasil plated.
Fits: Husqvarna 362, 365 chainsaws.
Includes: cylinder, piston, rings, wrist pin, cir clips.
Replaces OEM part: 503 93 90-71
Comes complete with gaskets, bearing, spark plug

Hyway brand cylinder kit. 48mm bore.
High quality Nikasil plated cylinder kit.
Fits: Stihl 036, MS360, 034 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1125 020 1215, 1125 020 1213
Comes complete with gaskets, bearing, spark plug

(2)

Hyway brand high quality Nikasil plated kit
Fits: Partner, Husqvarna K950 cut off saws
Replaces OEM part: 506 15 55-06
Includes: cylinder, piston, rings, wrist pin, circlips

(2)

Hyway brand cylinder kit. 55mm bore.
High quality Nikasil plated.
Fits: Husqvarna 390 chainsaws. Will also fit 385 as a big bore
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 544 00 65-02

(2)

Hyway brand cylinder kit. 56mm bore.
High quality Nikasil plated.
Fits: Husqvarna K960, K970 cut off saws
Replaces OEM part: 544 93 56-03, 544 93 56-02
Includes: cylinder, piston, rings, wrist pin, circlips

Hyway brand cylinder kit. 52mm bore.
High quality Nikasil plated
Fits: Stihl MS461 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1128 020 1250

(3)

Hyway brand high quality Nikasil plated cylinder kit 50mm bore.
Fits: Dolmar PC7312, PC7314, PC7330, PC7330 C, PC7335, PC7335 C, PC7430 and PC7435,
Makita DPC7300, DPC7301, DPC7310, DPC7311, DPC7320,DPC7321 and DPC7331,
Wacker BTS1030, BTS1030 L3, BTS1035 and BTS1035 L3

(2)

Hyway brand cylinder kit. 50mm bore.
High quality Nikasil plated.
Fits: Stihl MS441 chainsaw.
Replaces OEM part: 1138 020 1201

(2)

Hyway brand cylinder kit.
High quality Nikasil plated
Fits: Stihl TS410, TS420 cut off saws
Replaces OEM part: 4238-020-1202

(1)

Hyway brand cylinder kit. 50mm bore.
High quality Nikasil plated. Aftermarket for Stihl 044, MS440 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 1128 020 1227 with 10mm pin *Older 044 chainsaws made before serial number X29 382 283 have a 10mm wrist pin. There are a few rare chainsaws that are after that serial number that also have a 10mm wrist pin. Please verify your pin size before ordering.

(5)

Hyway brand cylinder kit. 52mm bore.
High quality Nikasil plated.
Fits: Husqvarna 272, 272XP chainsaws, 272K cut off saws
This also can fit 61, 268 for increased displacement.
Replaces OEM part: 503 60 96-71

(4)

Hyway brand big bore cylinder kit. 56mm bore.
High quality Nikasil plated.
Fits: Stihl 066, MS650, MS660 chainsaw.
Replaces OEM part: 1122 020 1211

(6)