Genuine Parts for Husqvarna Outdoor Power Equipment

NGK brand spark plug BPMR7A
Fits: many models of chainsaw and cut off saws.
Replaces: BOSCH WSR6F, CHAMPION CJ7Y
*Buy 10 or more and receive a 10% discount!

(135)

Bosch brand spark plug WSR6F
Fits: many models of chainsaw and cut off saws.
Replaces: NGK BPM7A, CHAMPION CJ7Y
*Buy 10 or more and receive a 10% discount!

(111)

Quality fuel filter/pick up body
Fits: Husqvarna chainsaws and cut off saws
Replaces OEM part: 503 44 32-01
This will fit a fuel line with an inner diameter of 3.5mm to 4mm
*Buy 10 or more and receive a 20% discount!

(62)

Quality aftermarket M5 nut
Fits most Stihl models
Husqvarna models: 50, 51, 55 muffler nut
Replaces OEM part: 9216 263 0700, 503 22 20-01

(36)

Genuine Husqvarna Blade 21" Reaper W/O Notches
Part #: 586 85 96-02
Fits LC221A, LC221RH, LC221FH, LC221AH, L221A, LC121FH, L421P, LC221R

(9)

Husqvarna Guide Bar Cover
Fits models: 18"-22" (53CM*11CM)
OEM part #: 501 83 44-11

(42)

Quality aftermarket T-wrench Flathead x 19mm x 13mm (3/4" x 1/2")
Fits: most chainsaws

(70)

Quality aftermarket air filter combo kit
Fits: Husqvarna K760, K770 cut off saws
Replaces OEM part: 574 36 23-01, 574 36 23-02

(7)

Torch brand spark plug
Fits Stihl, Husqvarna, Partner, Wacker, Makita cut off saws, chainsaws, etc.
Replaces: NGK BPM7A, Champion CJ7Y, Bosch WSR6F
*Buy 5 or more and receive a 20% discount!

(34)

Husqvarna XP+ 2-Stroke Oil has been engineered to maximize your engine’s performance.
2.6 oz - Mixes with 1 gallon of fuel

(6)

Quality aftermarket piston pin bearing
Fits: the following Husqvarna Chainsaws: 61, 268, 272, 357, 359, 362, 365, 371K, 372, 375K, 570, 575, 576, K750, K760
Fits: the following Jonsered Chainsaws: CS2156, CS2159, CS2163, CS2165, CS2171
Replaces OEM part: number 503 25 56-01

(15)

Husqvarna’s high octane fuel is mixed with our best synthetic oil blend.

(1)

The Husqvarna neck gaiter is a multi functional face, neck and head covering

(10)

Quality aftermarket air filter
Fits: Husqvarna 268, 272XP chainsaws with HD type air filter setup
Replaces OEM part: 503 55 11-01

(14)

Genuine Husqvarna Crankshaft Sleeve O-Ring
Part #: 503 26 30-19
Fits 362 XP, 365, 372 XP

(16)

Genuine Husqvarna Starter Cover Screw
Part #: 503 20 34-19
Fits 346 XP EPA, 346 XP, 351 EPA, 351, 351-, 353 EPA I, 353 EPA, 353

(4)

Quality aftermarket clutch drum bearing
Fits: Stihl 017, 018, MS170, MS180, 021, 023, 025, MS210, MS230, MS250, 026, MS260, 029, 039, MS290, MS310, MS390
Husqvarna 36, 41, 136, 141
Replaces OEM part: 9512 933 2260, 530 03 21-19

(57)

Husqvarna X-Guard Premium Bar and Chain Oil has been designed to provide ultimate protection to cutting equipment while operating a chainsaw.

(10)

Quality aftermarket ignition coil with cap
Fits: models Husqvarna models 340, 345, 346, 350, 351, 353, 357, 359, 362, 365, 371, 372, 385, 390
Fits: Jonsered models 2140, 2145, 2149, 2150, 2152, 2063, 2065, 2165, 2071, 2171, 2186
Replaces OEM part: 537 16 22-01

(22)

Husqvarna XP+ 2-Stroke Oil has been engineered to maximize your engine’s performance.
5.2 oz - Mixes with 2 gallons of fuel

(3)

Genuine Husqvarna Belt.Drive.21Eff.Awd
Part #: 580364609
Fits L221A, L221AHK, L221AK, L321AH, L321AHE, LC221A, LC221AH, M53

(10)

Husqvarna XP+ 2-Stroke Oil has been engineered to maximize your engine’s performance.
12.8 oz - Mixes with 5 gallons of fuel

(2)

Genuine Husqvarna Blade.42Sp"3N1
Part #: 532 42 27-19
Fits YTH2042, YTH2242, YTH22V42, PB175A46, PB185A42LT, PB195A42LT, PB195A46LT, PB195H42LT

Genuine Husqvarna Decal
Part #: 537 23 02-01
Fits 372 XP, 362 XP SPECIAL EPA, 372 XP EPA, 362 XP SPECIAL

(22)

Stop switch for Husqvarna chainsaws
Fits: Husqvarna 36, 41, 42, 50, 51, 55, 61, 66, 136, 141, 181, 242, 246, 254, 257, 261, 262, 266, 268, 272, 281, 288, 394, 395, 3120
Replaces OEM part: 503 71 79-01, 503 08 97-02 and 501-81-52-01

(20)

Genuine Husqvarna Spark Plug NGK
Part #: 503 23 51-11
Fits 123 C, 123 L, 123 LD, 130, 135 E, 135 Mark II, 140 E, 140

(3)

Quality aftermarket Hand Guard (Brake Lever) Bushing
For: Husqvarna 372, 371, 365, 362
Replaces OEM part(s) #: 503-77-52-01

(6)

Quality aftermarket ignition coil with cap.
Fits: Husqvarna 40, 45, 50, 51, 55, 61, 257, 261, 262, 266, 268, 272.
Replaces OEM part: 503 90 14-01

(43)

Quality aftermarket throttle rod
Fits: Husqvarna 50, 51, 55 chainsaws
Replaces OEM part: 501 77 80-02

(5)