Genuine Husqvarna Cylinder Assembly

(3)

Genuine Husqvarna Carburetor C3-El17
Part #: 503 28 32-07
Fits 340, 345, 350, 353

(4)

Hyway Titanikel Cylinder Kit (45mm) with fuel filter, NGK spark plug, bearing, gaskets, air filter. Fits Husqvarna 346 XP, 350, 351, 353.

(19)

Hyway Titanikel Plated Cylinder Kit (45mm) for Husqvarna 346 XP, 350. Premium, replaces OEM 503 86 99-03. Boosts power.

(14)

Genuine Husqvarna Ignition Module #544047001 for 333-461, Jonsered 2141-CS2159, RedMax G5300.

(3)

Genuine Husqvarna Muffler
Part #: 544 02 83-02
Fits 340, 340 EPA, 345, 345 EPA, 346 XP, 350, 350 EPA, 351

Wiha 8-piece T-handle chainsaw repair tool set – hex, nut drivers & Torx. Professional German quality for Stihl/Husqvarna service.

(26)

Genuine Husqvarna Carburetor
Part #: 503 28 32-10
Fits 340 E, 340, 345 E, 345, 350 EPA, 350, CS2141, CS2145

Quality aftermarket cylinder kit. 44mm bore.
Fits: Husqvarna 350, 351, 353 chainsaw
Open port cylinder includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 503 86 99-03
Comes complete with gaskets, bearing, spark plug, air filter

(5)

Genuine Husqvarna Tank Unit
Part #: 503 86 37-03
Fits 353, 345, 350, 340, 345 E, 340 E, 350 EPA, 346 XP

(3)

Restore smooth engagement with the Genuine Husqvarna 537110503 Clutch Assembly. This factory-original centrifugal clutch is designed for mid-range Husqvarna and Jonsered saws, including the 350, 450, and 455/460 Rancher series. Replaces worn shoes and weak springs to ensure optimal power transfer.

High-quality non-genuine .325" sprocket kit with clutch, drum, worm gear, bearing, and spur sprocket for Husqvarna chainsaws. Fits model 350

NGK BPMR7A (4626) Resistor Spark Plug – Box of 10. OEM for Stihl MS261–MS661, Husqvarna 346XP–572XP, Echo & more.

(6)

Genuine Husqvarna Extractor
Part #: 502 50 55-01
Fits 362, 365, 371, 372, 385, 340, 345, 350

(5)

Quality fuel filter/pick up body
Fits: Husqvarna chainsaws and cut off saws
Replaces OEM part: 503 44 32-01
This will fit a fuel line with an inner diameter of 3.5mm to 4mm
20 pack

(6)

The Oregon 108215XSF is a high-performance Power Mate® rim sprocket system for Husqvarna saws. Optimized for .325" pitch setups, this system features a replaceable free-floating rim that provides better chain alignment and smoother cutting than standard spur sprockets.

(6)

The Oregon 108308XF is a high-performance one-piece spur sprocket designed for mid-sized Husqvarna and Jonsered saws. Featuring a .325" pitch and 7-tooth design, this cold-forged sprocket offers professional-grade wear resistance and dependable power delivery.

(4)

High quality Italian made piston kit by Meteor.

(6)

Genuine Husqvarna Chainsaw Tune-Up Kit
Part #: 599 33 33-01
Fits 340 E, 340 EPA, 340, 345 E, 345 EPA, 345, 346 XP, 350 EPA

(8)

Quality aftermarket cylinder kit. 44mm bore.
Fits: Husqvarna 350, 351, 353 chainsaw
Open port cylinder includes: cylinder, piston, rings, wrist pin, cir clips
Replaces OEM part: 503 86 99-03

(16)

Quality aftermarket carburetor
Replaces Zama part C3-EL32
Fits: Husqvarna 340, 345, 350, 353 chainsaws
Fits: models with primer bulb

(2)

Genuine Husqvarna Chain Tensioner
Part #: 537 07 12-01
Fits 353, 359, 357 XP EPA, 340, 345, 359 EPA, 350, 345 EPA

(2)

Quality aftermarket Handlebar
Fits: Husqvarna 340, 345, 346 XP, 350, 353

(4)

Quality aftermarket complete flywheel
Fits: Husqvarna 340, 345, 346XP, 350, 351, 353 chainsaws
Replaces OEM part: 503 82 43-01

(7)

Upgrade your Husqvarna Chainsaw with this high-quality Hyway Piston Kit. Engineered for durability and enhanced performance, this kit ensures your Chainsaw operates at peak efficiency.

(16)

Non-Genuine Husqvarna Clutch Removal Tool

This essential tool is required for removing the clutch from various Husqvarna chainsaw models. Perfect for replacing your clutch and drive sprocket, this tool ensures you can perform maintenance with ease.

• Each tool has a 19mm nut fitting, allowing you to easily adapt a socket or bar wrench to torque.
• Clutches are reverse threaded, so be sure to turn in the proper direction. Using a piston stop will help.

Compatible with Husqvarna Models:

• 340
• 345
• 346 XP
• 350
• 351
• 353
• 445
• 450
• 455
• 460

Replaces Part Number: 502 54 16-03

Ensure your chainsaw operates smoothly by using this high-quality, genuine Husqvarna tool. Order yours today from HL SUPPLY!

(14)

Genuine Husqvarna Return Spring
Part #: 537 09 31-01
Fits 350, 340, 345 E, 340 E, 350 EPA, 357 XP, 340 EPA, 359

Quality aftermarket carburetor
Fits: Husqvarna 136, 137, 141, 142 chainsaws
Replaces OEM part: 530 07 19-87

(6)

Quality aftermarket sprocket cover with brake Complete assembly (magnesium cover)
Fits: Husqvarna 340, 345, 346XP, 350, 351, 353, 357, 359 chainsaws
Replaces OEM part: 537 10 78-01 (or 503 89 18-01)

(13)